Heavy Construction Equipment Parts Urbana Ohio

Heavy Equipment Repairs Allentown PA

Equipment Services LLC parts department, a top rated supplier of construction equipment in Urbana, Ohio. EQSLLC.Com is well known as the one go to company for Man Lift Parts in the Northeast but quickly become a favorite with people in and around Urbana, Ohio. When your heavy construction machinery in dire need of repair and you’re looking at purchasing old equipment parts in lieu of a new one? While there are many benefits to buying old parts, you must take extra caution when purchasinig them. Below are a few guidelines you can follow:

  1. Opt for a reliable shop to buy the parts.

You don’t want to get broken or unusable parts. Be certain that you’re getting it from a respectable place so you could return the part to them if it won’t work. Also, most of these trusted shops offer a warranty on their parts.

  1. Find out the history of the old machinery part

Always remember that you are buying old equipment part, so it could have gotten some wear and tear. Know precisely where the part was taken from and for how long that equipment has been used. It is also good to know if it is a used, repaired, or remanufactured part.

  1. Understand what you’re buying.

Equipment parts come in several kinds. A few parts may even look alike but will not work in the same way. Before buying from a dealer, be certain that you bring all the data about your construction equipment on hand, like its vehicle identification number. You never know when things like these can come handy.

New & Used Construction Equipment Urbana Ohio

Nowadays is not hard to find used {genuine} heavy equipment and or construction equipment on the internet. It is also not strange to get ripped off by less than honest characters. When you deal with Equipment Services LLC you are sure that you are dealing with a reputable heavy equipment and or construction equipment parts dealer. If you need equipment parts, you normally have two options. You may buy old or you may purchase brand new. Each option has its own benefits and it’s up to you to weigh them out. If you want to buy used machinery parts, below are more guidelines for you.

  1. Purchase used but authentic parts.

Several equipment parts are acquired from broken-down heavy machinery. There some that are produced by a third party. See if you have some way of knowing which group the part you’re buying falls under. You’re better off with old yet authentic parts.

  1. Know the part code.

When getting used heavy construction machinery parts, be sure that you have the part code with you. It ensures you that you will get the exact part that you need. You might have to go through the pains of knowing this information, but it will be all worth it in the end.

  1. Talk to the right people.

It pays to purchase parts from dealers who have long years of experience in the business. If you do, they can lead you to other dealers if they don’t have the part you require.

Used construction machinery parts are good if your construction equipment in dire need of repair and a new part proves to be very costly. Through these tips, you will definitely purchase the right one. If by any chance you don’t know about Equipment Services LLC we ask that you check out at our blog.

Urbana Heavy Equipment Related Blogs:

Best 6000 lb Telehandler To Rent

equipment rental Easton PA

If you are in the market for renting a 6,000 pound telehandler, you have a lot of choices. While there are many, the main three telehandlers you will have to choose from are Genie, JLG, and SkyTrak. The best way to choose a telehandler for rent is to examine the specifications of each option and compare these to your job’s specifications.

Height is one of the most important specifications to consider when renting a telehandler. You will have to get a telehandler that reaches the height you need for your jobs. If you fail to do so and attempt reaching heights above the specified maximum height reach you will risk toppling over. Toppling over can result in injury and fatality. Another characteristic similar to this is reach. If you try to reach farther than the machine can safely reach, the machine might become unbalanced. This is another cause of toppling over.

If you are considering renting the SkyTrak telescopic forklift, know that this machine’s maximum lift height is 36 feet 1 inch. Its maximum horizontal reach is 22 feet 4 inches. The drawbar pull for this machine is 22,000 pounds. It has a frame leveling of 10 degrees. When it comes to lift capacity, the SkyTrak telehandler can handle 6,000 pounds at full height. At maximum reach however, it can only hold 1,800 pounds. When lifting, the maximum speed is 12 seconds. When lowering, the maximum speed is 9 seconds. When telescoping in and out, the maximum speed is 14 seconds. When traveling, the maximum speed is 19 miles per hour.

The 6,000 pound JLG telescopic forklift has an 18,000 pound drawbar pull. This machine has 4 forward gears and 3 reverse gears. When traveling, the JLG telehandler can go a speed of 19.5 miles per hour. The lift capacity for this machine at maximum height is 6,000 pounds. The JLG telehandler will lift up to 42 feet and reach forward to 29 feet. When extended fully, it can hold 1,000 pounds. When moving upwards it maintains a speed of 14 seconds. When moving down it moves at a speed of 10 seconds. When extending, the JLG telescopic forklift has a speed of 20 seconds. When retracting, the JLG has a speed of 8 seconds.

The Genie telehandler drawbar pull is a lot less than the JLG at 15,100 pounds. Instead of 4 forward gears, the Genie has only 3 forward gears and 3 reverse gears. When travelling forward, the Genie telescopic forklift moves at 18 miles per hour. It lifts up to 36 feet high and can hold 5,000 pounds at this height. It will reach 21 feet forward and can carry 1,500 pounds while extended for the full 21 feet. The Genie telehandler lifts up in 10 seconds and booms down in 8 seconds. It extends in 11 seconds and retracts in 9 seconds. All of the telehandlers mentioned run on diesel fuel.

When looking to rent one of these telehandlers, it is vital that you compare their specs to those of the jobs you intend to carry out using these machines. If you rent a machine with specs that do not match your job, you will not be able to safely and efficiently carry out that job. If you need further assistance choosing a 6,000 telehandler, contact our EQS experts for more information.

Related Searches for Heavy Construction Equipment Parts  in Urbana, OH.

Heavy Construction Equipment Parts Urbana Ohio

Heavy Construction Equipment Parts Urbana Ohio Everyone in Massachusetts know that when looking for JLG T350 Parts, Equipment Services LLC is the one to call. But did you know that EQSLLC.Com is a top provider of heavy equipment parts in Urbana, Ohio and neighboring areas. Despite what you may think there're a [...]

2018-03-14T10:16:28+00:00