Heavy Construction Equipment Parts Oregon Ohio

Heavy Equipment Repairs Camden County NJ

Welcome to Equipment Services LLC parts department, a top provider of heavy equipment and or construction equipment in Oregon, Ohio. Equipment Services LLC is well known as the company go to company for Scissor Lifts Parts in New York but quickly become a favorite with companies in and around Oregon, OH. If your construction equipment require repairs and you’re considering buying used equipment parts instead of a new one? While there are several benefits to purchasing used parts, you must be extra careful when buying them. Below are some guidelines you can follow:

  1. Pick a reliable store to get the parts.

You do not want to end up with nonworking or mismatched parts. Make certain that you’re buying from a reputable place so you may return the part to them in case it does not work. Also, almost all of these reliable sellers offer a warranty on their items.

  1. Know the history of the old machinery part

Always remember that you’re purchasing old equipment part, which means it could have gone through some wear and tear. Learn precisely where the part came from and the length of time that machinery has been used. It is also good to know if it is a used, repaired, or refurbished part.

  1. Know what you’re purchasing.

Machinery parts come in different types. Several parts may even look similar but will not work in the same way. Before buying from a seller, make certain that you bring all the information about your construction machinery at hand, like its VIN. You will never know when things like these can come handy.

Genuine Heavy Equipment And Or Construction Equipment Oregon OH

Today is not hard to locate new or used {genuine} heavy construction equipment online. it’s also not rare to get ripped off by less than honest characters. When you deal with EQSLLC.Com you are sure that you are dealing with a reputable heavy construction equipment parts dealer. When you’re in need construction machinery parts, you normally have two options. You may buy old or you can purchase brand new. Each one has its own advantages and it’s up to you to choose. If you want to get used equipment parts, below are more guidelines for you.

  1. But used but authentic parts.

Some equipment parts are obtained from junked heavy machinery. Others are produced by another company. Check if you have some way of knowing which group the part you’re buying belongs to. You are better off with used yet authentic parts.

  1. Know the part code.

When purchasing old heavy construction machinery parts, be sure that you have the part code with you. It assures you that you will get the exact part that you want. You may have to go through the trouble of finding out this information, but it is all worth it in the end.

  1. Consult the right people.

It pays to purchase parts from providers who have many years of knowledge in the field. This way, they can lead you to other dealers if they don’t have the part you want.

Old heavy equipment parts are advisable if your construction machinery is in need of repairs and a brand new part proves to be too costly. Through these guidelines, you will surely buy the best choice. If you have heard of about EQSLLC.Com we ask that you check out at our blog.

Oregon Heavy Construction Equipment Related Articles:

Best 6000 lb Telehandler To Rent

equipment rental Middleburg PA

If you are in the market for renting a 6,000 pound telehandler, you have a lot of choices. While there are many, the main three telehandlers you will have to choose from are Genie, JLG, and SkyTrak. The best way to choose a telehandler for rent is to examine the specifications of each option and compare these to your job’s specifications.

Height is one of the most important specifications to consider when renting a telehandler. You will have to get a telehandler that reaches the height you need for your jobs. If you fail to do so and attempt reaching heights above the specified maximum height reach you will risk toppling over. Toppling over can result in injury and fatality. Another characteristic similar to this is reach. If you try to reach farther than the machine can safely reach, the machine might become unbalanced. This is another cause of toppling over.

If you are considering renting the SkyTrak telescopic forklift, know that this machine’s maximum lift height is 36 feet 1 inch. Its maximum horizontal reach is 22 feet 4 inches. The drawbar pull for this machine is 22,000 pounds. It has a frame leveling of 10 degrees. When it comes to lift capacity, the SkyTrak telehandler can handle 6,000 pounds at full height. At maximum reach however, it can only hold 1,800 pounds. When lifting, the maximum speed is 12 seconds. When lowering, the maximum speed is 9 seconds. When telescoping in and out, the maximum speed is 14 seconds. When traveling, the maximum speed is 19 miles per hour.

The 6,000 pound JLG telescopic forklift has an 18,000 pound drawbar pull. This machine has 4 forward gears and 3 reverse gears. When traveling, the JLG telehandler can go a speed of 19.5 miles per hour. The lift capacity for this machine at maximum height is 6,000 pounds. The JLG telehandler will lift up to 42 feet and reach forward to 29 feet. When extended fully, it can hold 1,000 pounds. When moving upwards it maintains a speed of 14 seconds. When moving down it moves at a speed of 10 seconds. When extending, the JLG telescopic forklift has a speed of 20 seconds. When retracting, the JLG has a speed of 8 seconds.

The Genie telehandler drawbar pull is a lot less than the JLG at 15,100 pounds. Instead of 4 forward gears, the Genie has only 3 forward gears and 3 reverse gears. When travelling forward, the Genie telescopic forklift moves at 18 miles per hour. It lifts up to 36 feet high and can hold 5,000 pounds at this height. It will reach 21 feet forward and can carry 1,500 pounds while extended for the full 21 feet. The Genie telehandler lifts up in 10 seconds and booms down in 8 seconds. It extends in 11 seconds and retracts in 9 seconds. All of the telehandlers mentioned run on diesel fuel.

When looking to rent one of these telehandlers, it is vital that you compare their specs to those of the jobs you intend to carry out using these machines. If you rent a machine with specs that do not match your job, you will not be able to safely and efficiently carry out that job. If you need further assistance choosing a 6,000 telehandler, contact our EQS experts for more information.

Related Searches for Heavy Equipment And Or Construction Equipment Parts  in Oregon, Ohio.

Heavy Construction Equipment Parts Oregon Ohio

Heavy Construction Equipment Parts Oregon Ohio Everyone in and around New Jersey know that when looking for Biljax Parts, EQSLLC.Com is the company to call! But did you know that EQSLLC.Com is a top supplier of heavy equipment parts in Oregon, OH and neighboring areas. Despite what you may think there're quite [...]

2018-03-15T20:11:54+00:00