Heavy Construction Equipment Parts Newark Ohio

Heavy Equipment Repairs Exton PA

Welcome to Equipment Services LLC parts department, a top provider of heavy construction equipment in Newark, Ohio. EQSLLC.Com is well known as the one go to company for JLG Lift Parts in the Northeast but rapidly become a favorite with everyone in and around Newark, Ohio. When your heavy construction equipment in need of repairs and you’re considering buying used equipment parts instead of a new one? While there are many benefits to purchasing used parts, you must take extra caution when purchasinig them. Below are a few tips you can follow:

  1. Opt for a respectable dealer to buy the parts.

You do not want to buy faulty or unusable parts. Make certain that you’re purchasing from a respectable dealer so you may bring back the part to them in case it does not work. Also, almost all of these trusted places offer a warranty on their parts.

  1. Know the history of the used equipment part

Always keep in mind that you’re purchasing used machinery part, so it may have gotten some wear and tear. Find out specifically where the part was taken from and for how long that equipment has been working. It also pays to know if it is an old, repaired, or remanufactured part.

  1. Understand what you’re getting.

Machinery parts come in different types. A few parts may actually look alike but won’t perform similarly. Before talking to a dealer, make sure that you have all the data about your construction equipment available, like its VIN. You’ll never know if things like these can come handy.

Genuine Heavy Equipment And Or Construction Equipment Newark Ohio

Today is not difficult to locate used {genuine} heavy equipment and or construction equipment online. It is also not rare to get ripped off by less than honest characters. When you deal with Equipment Services LLC you are sure that you are dealing with authorized heavy equipment and or construction equipment parts dealer. When you are in need heavy equipment parts, you technically have two choices. You can buy old or you can buy brand new. Each option has its own advantages and it is up to you to weigh them out. If you choose to purchase old machinery parts, below are more tips for you.

  1. But old but genuine parts.

Some machinery parts are acquired from broken-down heavy construction equipment. Some are produced by a third party. Check if you have a way of knowing which group the part you are purchasing belongs to. You are better off with old yet genuine parts.

  1. Get the part code.

When getting used heavy construction equipment parts, be sure that you have the part code with you. Doing so ensures you that you’ll get the actual part that you want. You may have to go through the trouble of knowing this detail, but it’ll be all worth it in the end.

  1. Ask the right people.

It pays to get parts from dealers who have long years of knowledge in the field. If you do, they can point you to other shops if they don’t have the part you need.

Used heavy machinery parts are advisable if your heavy machinery requires repair and a new part seems to be too costly. Through these guidelines, you will surely get the best one. If you do not know about EQSLLC.Com we ask that you take a look at our blog.

Newark Heavy Equipment And Or Construction Equipment Related Post:

Best 6000 lb Telehandler To Rent

Heavy Equipment Repairs Bensalem PA

If you are in the market for renting a 6,000 pound telehandler, you have a lot of choices. While there are many, the main three telehandlers you will have to choose from are Genie, JLG, and SkyTrak. The best way to choose a telehandler for rent is to examine the specifications of each option and compare these to your job’s specifications.

Height is one of the most important specifications to consider when renting a telehandler. You will have to get a telehandler that reaches the height you need for your jobs. If you fail to do so and attempt reaching heights above the specified maximum height reach you will risk toppling over. Toppling over can result in injury and fatality. Another characteristic similar to this is reach. If you try to reach farther than the machine can safely reach, the machine might become unbalanced. This is another cause of toppling over.

If you are considering renting the SkyTrak telescopic forklift, know that this machine’s maximum lift height is 36 feet 1 inch. Its maximum horizontal reach is 22 feet 4 inches. The drawbar pull for this machine is 22,000 pounds. It has a frame leveling of 10 degrees. When it comes to lift capacity, the SkyTrak telehandler can handle 6,000 pounds at full height. At maximum reach however, it can only hold 1,800 pounds. When lifting, the maximum speed is 12 seconds. When lowering, the maximum speed is 9 seconds. When telescoping in and out, the maximum speed is 14 seconds. When traveling, the maximum speed is 19 miles per hour.

The 6,000 pound JLG telescopic forklift has an 18,000 pound drawbar pull. This machine has 4 forward gears and 3 reverse gears. When traveling, the JLG telehandler can go a speed of 19.5 miles per hour. The lift capacity for this machine at maximum height is 6,000 pounds. The JLG telehandler will lift up to 42 feet and reach forward to 29 feet. When extended fully, it can hold 1,000 pounds. When moving upwards it maintains a speed of 14 seconds. When moving down it moves at a speed of 10 seconds. When extending, the JLG telescopic forklift has a speed of 20 seconds. When retracting, the JLG has a speed of 8 seconds.

The Genie telehandler drawbar pull is a lot less than the JLG at 15,100 pounds. Instead of 4 forward gears, the Genie has only 3 forward gears and 3 reverse gears. When travelling forward, the Genie telescopic forklift moves at 18 miles per hour. It lifts up to 36 feet high and can hold 5,000 pounds at this height. It will reach 21 feet forward and can carry 1,500 pounds while extended for the full 21 feet. The Genie telehandler lifts up in 10 seconds and booms down in 8 seconds. It extends in 11 seconds and retracts in 9 seconds. All of the telehandlers mentioned run on diesel fuel.

When looking to rent one of these telehandlers, it is vital that you compare their specs to those of the jobs you intend to carry out using these machines. If you rent a machine with specs that do not match your job, you will not be able to safely and efficiently carry out that job. If you need further assistance choosing a 6,000 telehandler, contact our EQS experts for more information.

Related Searches for Heavy Construction Equipment Parts  in Newark, OH.

Heavy Construction Equipment Parts Newark Ohio

Heavy Construction Equipment Parts Newark Ohio Developers in and around Massachusetts know that if looking for Biljax Parts, EQSLLC.Com is the one to call. But did you know that Equipment Services LLC is the #1 provider of heavy equipment parts in Newark, OH and neighboring areas. Despite what you may think there [...]

2018-03-11T18:49:15+00:00