Heavy Construction Equipment Parts Lancaster Ohio

equipment rental Trevose PA

Welcome to EQSLLC.Com parts department, a top provider of heavy construction equipment in Lancaster, Ohio. Equipment Services LLC is well known as the company go to company for Aerial Lift Parts in Maryland, Delaware but quickly become a favorite with developers in and around Lancaster, OH. If your construction equipment in need of repair and you are considering purchasing used equipment parts in lieu of a new one? While there are several benefits to buying old parts, you should be extra careful when buying them. Below are three tips you can follow:

  1. Pick a trusted place to get the parts.

You don’t want to end up with defective or mismatched parts. Make certain that you are getting it from a reliable dealer so you can bring back the part to them in case it will not work. Also, most of these reliable shops offer a guarantee on their items.

  1. Know the background of the used machinery part

Always keep in mind that you are getting old equipment part, which means it could have gotten some wear and tear. Know exactly where the part was taken from and for how long that equipment has been used. It is also good to know if it is a used, repaired, or remanufactured part.

  1. Know what you are buying.

Machinery parts come in several kinds. Some parts may actually look the same but won’t work alike. Before buying from a seller, make sure that you carry all the information about your heavy machinery at hand, like its VIN number. You will never know if things such as these can come handy.

Genuine Heavy Equipment And Or Construction Equipment Lancaster Ohio

Nowadays is not hard to locate used {genuine} heavy construction equipment online. it’s also not strange to get ripped off by shady characters. When you deal with EQSLLC.Com you are sure that you’re dealing with a reputable heavy construction equipment parts dealer. If you need equipment parts, you technically have two choices. You can purchase old or you can purchase new. Each one has its own advantages and it’s up to you to weigh them out. If you want to get old machinery parts, below are more tips for you.

  1. But used but authentic parts.

Some machinery parts are removed from junked heavy machinery. Some are produced by a third party. Check if you have some way of knowing which group the part you are getting falls under. You are better off with used yet genuine parts.

  1. Know the part code.

When getting old heavy construction equipment parts, be certain that you know the part code with you. Doing so ensures you that you’ll get the exact part that you require. You may have to go through the pains of finding out this detail, but it will be all worth it in the end.

  1. Talk to the right people.

It pays to purchase parts from people who have many years of experience in the business. If you do, they could point you to other dealers if they do not have the part you want.

Old construction machinery parts are best if your construction machinery requires repair and a new part seems to be too expensive. With these guidelines, you’ll definitely get the perfect choice. If by any chance you do not know about EQSLLC.Com we ask that you visit at our blog.

Lancaster Heavy Equipment Related Blog Post:

Best 6000 lb Telehandler To Rent

equipment rental Pottstown PA

If you are in the market for renting a 6,000 pound telehandler, you have a lot of choices. While there are many, the main three telehandlers you will have to choose from are Genie, JLG, and SkyTrak. The best way to choose a telehandler for rent is to examine the specifications of each option and compare these to your job’s specifications.

Height is one of the most important specifications to consider when renting a telehandler. You will have to get a telehandler that reaches the height you need for your jobs. If you fail to do so and attempt reaching heights above the specified maximum height reach you will risk toppling over. Toppling over can result in injury and fatality. Another characteristic similar to this is reach. If you try to reach farther than the machine can safely reach, the machine might become unbalanced. This is another cause of toppling over.

If you are considering renting the SkyTrak telescopic forklift, know that this machine’s maximum lift height is 36 feet 1 inch. Its maximum horizontal reach is 22 feet 4 inches. The drawbar pull for this machine is 22,000 pounds. It has a frame leveling of 10 degrees. When it comes to lift capacity, the SkyTrak telehandler can handle 6,000 pounds at full height. At maximum reach however, it can only hold 1,800 pounds. When lifting, the maximum speed is 12 seconds. When lowering, the maximum speed is 9 seconds. When telescoping in and out, the maximum speed is 14 seconds. When traveling, the maximum speed is 19 miles per hour.

The 6,000 pound JLG telescopic forklift has an 18,000 pound drawbar pull. This machine has 4 forward gears and 3 reverse gears. When traveling, the JLG telehandler can go a speed of 19.5 miles per hour. The lift capacity for this machine at maximum height is 6,000 pounds. The JLG telehandler will lift up to 42 feet and reach forward to 29 feet. When extended fully, it can hold 1,000 pounds. When moving upwards it maintains a speed of 14 seconds. When moving down it moves at a speed of 10 seconds. When extending, the JLG telescopic forklift has a speed of 20 seconds. When retracting, the JLG has a speed of 8 seconds.

The Genie telehandler drawbar pull is a lot less than the JLG at 15,100 pounds. Instead of 4 forward gears, the Genie has only 3 forward gears and 3 reverse gears. When travelling forward, the Genie telescopic forklift moves at 18 miles per hour. It lifts up to 36 feet high and can hold 5,000 pounds at this height. It will reach 21 feet forward and can carry 1,500 pounds while extended for the full 21 feet. The Genie telehandler lifts up in 10 seconds and booms down in 8 seconds. It extends in 11 seconds and retracts in 9 seconds. All of the telehandlers mentioned run on diesel fuel.

When looking to rent one of these telehandlers, it is vital that you compare their specs to those of the jobs you intend to carry out using these machines. If you rent a machine with specs that do not match your job, you will not be able to safely and efficiently carry out that job. If you need further assistance choosing a 6,000 telehandler, contact our EQS experts for more information.

Related Searches for Heavy Equipment And Or Construction Equipment Parts  in Lancaster, Ohio.

Heavy Construction Equipment Parts Lancaster Ohio

Heavy Construction Equipment Parts Lancaster Ohio People in Massachusetts know that when looking for Used Scissor Lift Parts, Equipment Services LLC is the company to contact! But did you know that EQSLLC.Com is the #1 supplier of heavy equipment parts in Lancaster, OH and neighboring areas. Regardless of what you may think [...]

2018-03-07T00:02:08+00:00