Heavy Construction Equipment Parts Jefferson County Ohio

Heavy Equipment Repairs Exton PA

Welcome to Equipment Services LLC parts department, a top rated supplier of construction equipment in Jefferson County, Ohio. EQSLLC.Com is well known as the one go to company for Scissor Lifts Parts in Massachusetts but quickly become a favorite with construction companies in and around Jefferson County, Ohio. If your construction equipment in need of repair and you’re looking at purchasing old machinery parts instead of a new one? While there are several benefits to buying old parts, you should take extra caution when buying them. Below are a few guidelines you can follow:

  1. Select a reliable dealer to buy the parts.

You don’t want to get broken or incompatible parts. Be sure that you’re buying from a reputable store so you can bring back the part to them in case it does not work. Also, almost all of these reliable shops offer a guarantee on their items.

  1. Learn about the background of the used equipment part

Always keep in mind that you are getting used equipment part, so it may have gone through some wear and tear. Know specifically where the part came from and the length of time that machinery has been working. It is also good to know if it is an old, repaired, or refurbished part.

  1. Know what you’re buying.

Machinery parts come in different types. Some parts may actually look the same but will not perform in the same way. When talking to a seller, make sure that you bring all the data about your heavy machinery available, like its VIN number. You’ll never know if things like these will come handy.

New & Used Heavy Construction Equipment Jefferson County OH

Nowadays is not difficult to find new {genuine} construction equipment online. it’s also not rare to get scammed by less than legit characters. When you deal with Equipment Services LLC you can be sure that you’re dealing with authorized heavy construction equipment parts dealer. When you need heavy equipment parts, you technically have two choices. You can buy old or you can buy brand new. Each one has its own advantages and it’s up to you to weigh them out. If you decide to get old equipment parts, below are more tips for you.

  1. Purchase old yet genuine parts.

Some equipment parts are obtained from broken-down heavy machinery. While Others are produced by another company. Check if you have a way of knowing which category the part you are getting falls under. You are better off with old yet authentic parts.

  1. Use the part code.

When getting used heavy construction equipment parts, make certain that you have the part code with you. Doing so assures you that you’ll get hold of the actual part that you need. You might have to go through the pains of knowing this detail, but it is all worth it in the end.

  1. Ask the experts.

It pays to purchase parts from people who have many years of knowledge in the field. If you do, they could lead you to other dealers if they don’t carry the part you require.

Old construction machinery parts are ideal if your construction machinery requires repairs and a brand new part proves to be very expensive. With these guidelines, you’ll definitely buy the perfect one. If you have heard of about Equipment Services LLC we encourage that you take a look at our blog.

Jefferson County Heavy Equipment Related Blogs:

Best 6000 lb Telehandler To Rent

equipment rental Langhorne PA

If you are in the market for renting a 6,000 pound telehandler, you have a lot of choices. While there are many, the main three telehandlers you will have to choose from are Genie, JLG, and SkyTrak. The best way to choose a telehandler for rent is to examine the specifications of each option and compare these to your job’s specifications.

Height is one of the most important specifications to consider when renting a telehandler. You will have to get a telehandler that reaches the height you need for your jobs. If you fail to do so and attempt reaching heights above the specified maximum height reach you will risk toppling over. Toppling over can result in injury and fatality. Another characteristic similar to this is reach. If you try to reach farther than the machine can safely reach, the machine might become unbalanced. This is another cause of toppling over.

If you are considering renting the SkyTrak telescopic forklift, know that this machine’s maximum lift height is 36 feet 1 inch. Its maximum horizontal reach is 22 feet 4 inches. The drawbar pull for this machine is 22,000 pounds. It has a frame leveling of 10 degrees. When it comes to lift capacity, the SkyTrak telehandler can handle 6,000 pounds at full height. At maximum reach however, it can only hold 1,800 pounds. When lifting, the maximum speed is 12 seconds. When lowering, the maximum speed is 9 seconds. When telescoping in and out, the maximum speed is 14 seconds. When traveling, the maximum speed is 19 miles per hour.

The 6,000 pound JLG telescopic forklift has an 18,000 pound drawbar pull. This machine has 4 forward gears and 3 reverse gears. When traveling, the JLG telehandler can go a speed of 19.5 miles per hour. The lift capacity for this machine at maximum height is 6,000 pounds. The JLG telehandler will lift up to 42 feet and reach forward to 29 feet. When extended fully, it can hold 1,000 pounds. When moving upwards it maintains a speed of 14 seconds. When moving down it moves at a speed of 10 seconds. When extending, the JLG telescopic forklift has a speed of 20 seconds. When retracting, the JLG has a speed of 8 seconds.

The Genie telehandler drawbar pull is a lot less than the JLG at 15,100 pounds. Instead of 4 forward gears, the Genie has only 3 forward gears and 3 reverse gears. When travelling forward, the Genie telescopic forklift moves at 18 miles per hour. It lifts up to 36 feet high and can hold 5,000 pounds at this height. It will reach 21 feet forward and can carry 1,500 pounds while extended for the full 21 feet. The Genie telehandler lifts up in 10 seconds and booms down in 8 seconds. It extends in 11 seconds and retracts in 9 seconds. All of the telehandlers mentioned run on diesel fuel.

When looking to rent one of these telehandlers, it is vital that you compare their specs to those of the jobs you intend to carry out using these machines. If you rent a machine with specs that do not match your job, you will not be able to safely and efficiently carry out that job. If you need further assistance choosing a 6,000 telehandler, contact our EQS experts for more information.

Related Searches for Construction Equipment Parts  in Jefferson County, Ohio.

Heavy Construction Equipment Parts Jefferson County Ohio

Heavy Construction Equipment Parts Jefferson County Ohio Developers in the Northeast know that if looking for Scissor Lifts Parts, EQSLLC.Com is the company to contact. But did you know that EQSLLC.Com is the top provider of heavy equipment parts in Jefferson County, OH and neighboring areas. Despite what you may think there [...]

2018-03-03T17:20:53+00:00