Heavy Construction Equipment Parts Groveport Ohio
Equipment Services LLC parts department, a top provider of construction equipment in Groveport, Ohio. Equipment Services LLC is well known as the one go to company for Biljax Parts in New York but rapidly become a favorite with contractors in and around Groveport, OH. If your heavy construction equipment require repairs and you’re considering purchasing old equipment parts instead of a new one? While there are several benefits to buying old parts, you should take extra caution when purchasinig them. Below are three guidelines you can follow:
- Choose a good place to buy the parts.
You don’t want to end up with broken or unusable parts. Make sure that you’re purchasing from a trusted shop so you may return the part to them if it does not work. Also, almost all of these reputable places offer a guarantee on their parts.
- Know the background of the old equipment part
Always remember that you are purchasing used equipment part, which means it could have gone through some wear and tear. Find out exactly where the part was taken from and for how long that machinery has been working. It is also good to know if it is an old, repaired, or refurbished part.
- Understand what you are purchasing.
Machinery parts come in different kinds. Several parts may actually look the same but won’t perform in the same way. Before talking to a dealer, be certain that you have all the data about your construction machinery on hand, like its VIN. You will never know when things like these will come handy.
New & Used Heavy Equipment And Or Construction Equipment Groveport OH
Nowadays is not difficult to find new or used {genuine} construction equipment on the internet. It is also not rare to get scammed by less than legit characters. When you deal with Equipment Services LLC you are sure that you are dealing with authorized heavy construction equipment parts dealer. When you are in need construction machinery parts, you technically have two choices. You can purchase old or you can buy brand new. Each option has its own benefits and it is up to you to weigh them out. If you choose to purchase old equipment parts, below are more guidelines for you.
- But used yet genuine parts.
Most machinery parts are acquired from junked heavy construction equipment. There some that are manufactured by another company. See if you have some way of knowing which category the part you’re getting belongs to. You’re better off with used but genuine parts.
- Use the part code.
When getting old heavy construction equipment parts, make certain that you know the part code available. That assures you that you’ll be given the actual part that you need. You may have to go through the trouble of knowing this detail, but it’s all worth it in the end.
- Ask the experts.
It pays to buy parts from dealers who have many years of experience in the field. If you do, they can lead you to other dealers if they don’t sell the part you require.
Used construction machinery parts are good if your construction machinery in dire need of repairs and a new part seems to be too costly. With these guidelines, you’ll certainly buy the perfect one. If by any chance you do not know about EQSLLC.Com we encourage that you visit at our blog.
Groveport Construction Equipment Related Blog Post:
Best 8000 lb Telehandler
Telehandler rental customers in today’s society are offered many options, which can be both a blessing and a curse. While there is often an option for each possible need, the variety telehandler for rent with many makes and models can make it hard to choose a machine. When searching for the right telehandler to rent, it is important to look at the specifications of each machine in comparison to what you need for your job. You want to find the best fit at the lowest price, as this is how you get the most bang for your buck.
One of the many characteristics that are detrimental to renting a telehandler is the working height. You cannot accomplish a task at 50 feet if your telehandler only reaches 48 feet. When comparing the 8,000 Lb SkyTrak telehandler and Genie telehandlers, the working heights are actually quite similar. The Genie telescopic forklift has a maximum lift height of 43 feet and 10 inches. The maximum lift height for a SkyTrak telescopic forklift is only slightly lower at 41 feet 11 and inches. If you need the extra 2 feet, opt for the Genie. If this difference does not seem significant to your job, it is important that you closely examine more characteristics to find exactly what your needs are for your next job.
Similar to the lift height, you also need to make sure the telehandler you choose has an adequate horizontal reach distance. The Genie telehandler has a horizontal reach of 27 feet, while the SkyTrak has a horizontal reach of approximately 26 feet 7 inches. If you try to reach beyond these distances, you run the risk of toppling over or putting excessive stress on the machine and potentially damaging it. This is extremely dangerous as it can result in injury and even fatality. To stay safe during your job, make sure you choose the 8,000 pound telehandler with a reach distance that meets your needs.
A less important factor that you may want to consider is speed. The drive speed for the Genie telehandler is 15 miles per hour. The maximum travel speed for the SkyTrak is 19 miles per hour. The SkyTrak telehandler lift speed is 15 seconds and the lower speed is 13 seconds. It telescopes in at 14 seconds and out at 17 seconds. The Genie has a lift speed of 15 seconds and a lower speed of 11 seconds. The Genie telescopes in at 18 seconds and out at 14 seconds. As you can see, the SkyTrak moves at a faster pace when traveling. It also moves faster when in use. Therefore, if you value speed you should opt for the SkyTrack model over the Genie model.
The SkyTrak machine weights 22,600 pounds. The Genie weights slightly less than the SkyTrak at about 22,500 pounds. If you are looking for a lighter machine, you should choose the Genie. Lighter weight could mean easier transport and better fuel economy.
If you are interested in finding the right 8,000 pound telehandler and seek further assistance, feel free to contact the experts here at Equipment Services. We will be happy to walk you through the process to ensure that you find a telehandler that meets all of your needs for your next job.
Related Searches for Heavy Equipment And Or Construction Equipment Parts in Groveport, Ohio.
Thanks for visiting Equipment Services LLC if you need help with Bil Jax Parts contact us!