Heavy Construction Equipment Parts Clinton County Ohio
Welcome to EQSLLC.Com parts department, a top supplier of heavy construction equipment in Clinton County, Ohio. EQSLLC.Com is well known as the one go to company for JLG Boom Lift Parts in Philadelphia but rapidly become a favorite with developers in Clinton County, OH. When your heavy construction machinery require repair and you are looking at buying used equipment parts instead of a new one? While there are several advantages to purchasing used parts, you must take extra caution when buying them. Below are some tips you can follow:
- Pick a respectable store to purchase the parts.
You do not want to purchase nonworking or unusable parts. Make sure that you’re purchasing from a reliable dealer so you may return the part to them in case it won’t work. Also, most of these respectable stores offer a guarantee on their products.
- Find out the history of the used equipment part
Always keep in mind that you are buying old machinery part, so it may have gone through some wear and tear. Learn precisely where the part came from and the length of time that machinery has been used. It is also good to know if it is an old, repaired, or refurbished part.
- Know what you are buying.
Machinery parts come in different types. Some parts may even look similar but won’t work similarly. When talking to a dealer, make sure that you carry all the information about your construction machinery at hand, like its vehicle identification number. You never know if things like these will come handy.
Genuine Heavy Equipment Clinton County OH
Nowadays is not hard to locate new {genuine} heavy equipment and or construction equipment online. it’s also not rare to get ripped off by less than legit characters. When you deal with EQSLLC.Com you can be sure that you are dealing with a reputable heavy equipment parts dealer. If you are in need construction machinery parts, you technically have two choices. You may buy used or you can buy new. Each one has its own benefits and it is up to you to weigh them out. If you decide to get old equipment parts, below are more tips for you.
- Purchase old yet genuine parts.
Some machinery parts are acquired from broken-down heavy construction equipment. Others are produced by a third party. See if you have a way of knowing which category the part you’re buying falls under. You are better off with used but genuine parts.
- Use the part code.
When buying used heavy construction equipment parts, make sure that you have the part code available. It ensures you that you’ll be given the actual part that you require. You may have to go through the trouble of finding out this information, but it will be all worth it in the end.
- Ask the experts.
It pays to purchase parts from dealers who have many years of experience in the field. If you do, they could point you to other dealers if they don’t have the part you want.
Used heavy machinery parts are ideal if your heavy equipment in dire need of repairs and a new part proves to be too costly. Through these guidelines, you will surely purchase the right choice. If by any chance you do not know of Equipment Services LLC we ask that you visit at our blog.
Clinton County Heavy Construction Equipment Related Articles:
Best 6000 lb Telehandler To Rent
If you are in the market for renting a 6,000 pound telehandler, you have a lot of choices. While there are many, the main three telehandlers you will have to choose from are Genie, JLG, and SkyTrak. The best way to choose a telehandler for rent is to examine the specifications of each option and compare these to your job’s specifications.
Height is one of the most important specifications to consider when renting a telehandler. You will have to get a telehandler that reaches the height you need for your jobs. If you fail to do so and attempt reaching heights above the specified maximum height reach you will risk toppling over. Toppling over can result in injury and fatality. Another characteristic similar to this is reach. If you try to reach farther than the machine can safely reach, the machine might become unbalanced. This is another cause of toppling over.
If you are considering renting the SkyTrak telescopic forklift, know that this machine’s maximum lift height is 36 feet 1 inch. Its maximum horizontal reach is 22 feet 4 inches. The drawbar pull for this machine is 22,000 pounds. It has a frame leveling of 10 degrees. When it comes to lift capacity, the SkyTrak telehandler can handle 6,000 pounds at full height. At maximum reach however, it can only hold 1,800 pounds. When lifting, the maximum speed is 12 seconds. When lowering, the maximum speed is 9 seconds. When telescoping in and out, the maximum speed is 14 seconds. When traveling, the maximum speed is 19 miles per hour.
The 6,000 pound JLG telescopic forklift has an 18,000 pound drawbar pull. This machine has 4 forward gears and 3 reverse gears. When traveling, the JLG telehandler can go a speed of 19.5 miles per hour. The lift capacity for this machine at maximum height is 6,000 pounds. The JLG telehandler will lift up to 42 feet and reach forward to 29 feet. When extended fully, it can hold 1,000 pounds. When moving upwards it maintains a speed of 14 seconds. When moving down it moves at a speed of 10 seconds. When extending, the JLG telescopic forklift has a speed of 20 seconds. When retracting, the JLG has a speed of 8 seconds.
The Genie telehandler drawbar pull is a lot less than the JLG at 15,100 pounds. Instead of 4 forward gears, the Genie has only 3 forward gears and 3 reverse gears. When travelling forward, the Genie telescopic forklift moves at 18 miles per hour. It lifts up to 36 feet high and can hold 5,000 pounds at this height. It will reach 21 feet forward and can carry 1,500 pounds while extended for the full 21 feet. The Genie telehandler lifts up in 10 seconds and booms down in 8 seconds. It extends in 11 seconds and retracts in 9 seconds. All of the telehandlers mentioned run on diesel fuel.
When looking to rent one of these telehandlers, it is vital that you compare their specs to those of the jobs you intend to carry out using these machines. If you rent a machine with specs that do not match your job, you will not be able to safely and efficiently carry out that job. If you need further assistance choosing a 6,000 telehandler, contact our EQS experts for more information.
Related Searches for Heavy Construction Equipment Parts in Clinton County, OH.
Thank you for stopping by our website if you need help with JLG T350 Parts contact us.