Heavy Construction Equipment Parts Athens Ohio

equipment rental Coraopolis PA

Equipment Services LLC parts department, a top provider of heavy construction equipment in Athens, OH. Equipment Services LLC is well known as the company go to company for Man Lift Parts in Philadelphia but rapidly become a favorite with everyone in Athens, OH. If your construction machinery in need of repair and you are considering purchasing old equipment parts in lieu of a new one? While there are a lot of benefits to buying old parts, you must take extra caution when buying them. Below are a few tips you can follow:

  1. Pick a reputable store to purchase the parts.

You don’t want to end up with damaged or unusable parts. Be certain that you’re purchasing from a reliable seller so you may bring back the part to them in case it does not work. Also, almost all of these respectable dealers offer a warranty on their parts.

  1. Know the background of the used machinery part

Always remember that you are buying old equipment part, so it may have gone through some wear and tear. Find out specifically where the part was taken from and the length of time that machinery has been used. It is also good to know if it is an old, repaired, or remanufactured part.

  1. Know what you’re buying.

Machinery parts come in several types. Some parts may even look the same but won’t work similarly. When talking to a parts provider, be certain that you bring all the data about your heavy machinery on hand, like its VIN. You never know when things like these will come handy.

Genuine Heavy Equipment Athens Ohio

Today is not difficult to find new {genuine} heavy construction equipment on the internet. it’s also not strange to get ripped off by less than legit characters. When you deal with Equipment Services LLC you are sure that you are dealing with authorized construction equipment parts dealer. When you are in need heavy equipment parts, you technically have two options. You may buy old or you may purchase new. Each one has its own advantages and it’s up to you to weigh them out. If you want to get old equipment parts, below are more guidelines for you.

  1. Get used yet genuine parts.

Several equipment parts are removed from junked heavy construction equipment. There some that are produced by another company. Check if you have a way of knowing which group the part you’re getting falls under. You’re better off with used yet genuine parts.

  1. Get the part code.

When getting used heavy construction equipment parts, make sure that you have the part code available. Doing so ensures you that you’ll get hold of the actual part that you need. You might have to go through the pains of knowing this information, but it’s all worth it in the end.

  1. Ask the right people.

It pays to buy parts from dealers who have long years of knowledge in the field. If you do, they could point you to other places if they don’t carry the part you require.

Old heavy equipment parts are best if your heavy equipment is in need of repairs and a new part seems to be too expensive. With these guidelines, you will certainly end up with the best choice. If you never heard of about EQSLLC.Com we ask that you visit at our blog.

Athens Heavy Construction Equipment Related Articles:

Best 6000 lb Telehandler To Rent

equipment rental Blandon PA

If you are in the market for renting a 6,000 pound telehandler, you have a lot of choices. While there are many, the main three telehandlers you will have to choose from are Genie, JLG, and SkyTrak. The best way to choose a telehandler for rent is to examine the specifications of each option and compare these to your job’s specifications.

Height is one of the most important specifications to consider when renting a telehandler. You will have to get a telehandler that reaches the height you need for your jobs. If you fail to do so and attempt reaching heights above the specified maximum height reach you will risk toppling over. Toppling over can result in injury and fatality. Another characteristic similar to this is reach. If you try to reach farther than the machine can safely reach, the machine might become unbalanced. This is another cause of toppling over.

If you are considering renting the SkyTrak telescopic forklift, know that this machine’s maximum lift height is 36 feet 1 inch. Its maximum horizontal reach is 22 feet 4 inches. The drawbar pull for this machine is 22,000 pounds. It has a frame leveling of 10 degrees. When it comes to lift capacity, the SkyTrak telehandler can handle 6,000 pounds at full height. At maximum reach however, it can only hold 1,800 pounds. When lifting, the maximum speed is 12 seconds. When lowering, the maximum speed is 9 seconds. When telescoping in and out, the maximum speed is 14 seconds. When traveling, the maximum speed is 19 miles per hour.

The 6,000 pound JLG telescopic forklift has an 18,000 pound drawbar pull. This machine has 4 forward gears and 3 reverse gears. When traveling, the JLG telehandler can go a speed of 19.5 miles per hour. The lift capacity for this machine at maximum height is 6,000 pounds. The JLG telehandler will lift up to 42 feet and reach forward to 29 feet. When extended fully, it can hold 1,000 pounds. When moving upwards it maintains a speed of 14 seconds. When moving down it moves at a speed of 10 seconds. When extending, the JLG telescopic forklift has a speed of 20 seconds. When retracting, the JLG has a speed of 8 seconds.

The Genie telehandler drawbar pull is a lot less than the JLG at 15,100 pounds. Instead of 4 forward gears, the Genie has only 3 forward gears and 3 reverse gears. When travelling forward, the Genie telescopic forklift moves at 18 miles per hour. It lifts up to 36 feet high and can hold 5,000 pounds at this height. It will reach 21 feet forward and can carry 1,500 pounds while extended for the full 21 feet. The Genie telehandler lifts up in 10 seconds and booms down in 8 seconds. It extends in 11 seconds and retracts in 9 seconds. All of the telehandlers mentioned run on diesel fuel.

When looking to rent one of these telehandlers, it is vital that you compare their specs to those of the jobs you intend to carry out using these machines. If you rent a machine with specs that do not match your job, you will not be able to safely and efficiently carry out that job. If you need further assistance choosing a 6,000 telehandler, contact our EQS experts for more information.

Related Searches for Construction Equipment Parts  in Athens, Ohio.

Heavy Construction Equipment Parts Athens Ohio

Heavy Construction Equipment Parts Athens Ohio Everyone in Maryland, Delaware know that when looking for Boom Lift Parts, Equipment Services LLC is the company to contact. But did you know that Equipment Services LLC is a top supplier of heavy equipment parts in Athens, OH and neighboring areas. Regardless of what you [...]

2018-03-09T21:05:46+00:00