Heavy Construction Equipment Parts Ashland County Ohio

equipment rental Jenkintown PA

EQSLLC.Com parts department, a top rated supplier of heavy construction equipment in Ashland County, Ohio. EQSLLC.Com is well known as the one go to company for JLG Boom Lift Parts in Philadelphia but rapidly become a favorite with everyone in Ashland County, OH. When your heavy construction machinery require repair and you’re considering buying old machinery parts instead of a new one? While there are several benefits to purchasing old parts, you must be extra careful when buying them. Below are three tips you can follow:

  1. Pick a trusted seller to get the parts.

You do not want to purchase broken or mismatched parts. Be certain that you are purchasing from a reputable place so you could bring back the part to them in case it does not work. Also, almost all of these reputable dealers offer a guarantee on their items.

  1. Learn about the history of the used machinery part

Always keep in mind that you are buying used equipment part, so it could have gone through some wear and tear. Know exactly where the part was taken from and for how long that machinery has been used. It is also good to know if it is an old, repaired, or refurbished part.

  1. Know what you’re purchasing.

Equipment parts come in different types. A few parts may actually look the same but won’t perform in the same way. Before buying from a dealer, make certain that you carry all the information about your construction machinery available, like its vehicle identification number. You never know when things such as these will come handy.

Genuine Heavy Equipment Ashland County OH

Today is not difficult to find used {genuine} heavy equipment and or construction equipment on the internet. it’s also not strange to get scammed by less than honest characters. When you deal with EQSLLC.Com you can be sure that you are dealing with authorized heavy equipment parts dealer. If you are in need equipment parts, you technically have two options. You can purchase old or you may buy brand new. Each one has its own benefits and it’s up to you to decide which way to go. If you decide to get old equipment parts, below are more guidelines for you.

  1. But used yet authentic parts.

Some machinery parts are acquired from broken-down heavy machinery. While Others are produced by a third party. Check if you have a way of knowing which category the part you’re buying falls under. You’re better off with used yet authentic parts.

  1. Use the part code.

When getting old heavy construction machinery parts, make sure that you give the part code with you. Doing so assures you that you’ll get hold of the actual part that you want. You might have to go through the trouble of finding out this information, but it’s all worth it in the end.

  1. Consult the right people.

It pays to purchase parts from providers who have long years of experience in the business. If you do, they can refer you to other shops if they don’t carry the part you require.

Old heavy equipment parts are good if your construction equipment is in need of repair and a brand new part proves to be too expensive. Through these guidelines, you will definitely get the best one. If by any chance you never heard of of EQSLLC.Com we encourage that you check out at our blog.

Ashland County Heavy Construction Equipment Related Post:

How to develop a fall prevention plan when using aerial lifts?

equipment rental New Castle PA

Safety is of utmost importance when it comes to dangerous construction work. In order to reduce injury and fatality of your employees, you must develop a fall prevention plan when using aerial lifts. OSHA modified their fall protection guidelines in the year 2010 to reduce injuries and fatalities in the residential construction workplace. Under the new guidelines, construction jobs that require an employee to be above 6 feet in the air must take certain precautions such as guardrail systems, safety net systems, and personal fall arrest systems. This is not necessary if and only if the employer proves that the safety systems do more harm than good. If the employer successfully proves that the safety systems are a hazard to their employees, they are required to instead implement a fall protection plan.

The fall protection plan must first be created by the employer. After it has been created, it must be submitted to a qualified person to be approved. This protection plan must be re-approved each time a change is made. If working in an aerial lift or scissor lift platform, employers must have the guardrail system in place or tied off. There are many methods for tie-offs, but the three acceptable ones are restraint systems, positioning devices, and fall arrest systems.

A restraint system consists solely of a body belt and a harness. When using a restraint system, the employer must create a fall protection plan in case an employee falls from a great distance.

Positioning devices are commonly used in construction work. A positioning device is a body belt or harness system. This device lets an employee be supported by a vertical surface, which allows them to work hands free. The vertical surface could be a pole or something similar. These positioning devices have a maximum fall of no more than 2 feet. Positioning devices are prohibited for use with scissor lifts and any other machine that works on a horizontal platform.

Another commonly used tie-off in construction work is a fall arrest system. Fall arrest systems are devices that use a body harness—not a body belt—to allow arrested fall. This is only applicable when the aerial lift can physically withstand the vertical and lateral loads an arrested fall causes.

If you are not following these guidelines, now is a good time to start. OSHA is enforcing these guidelines strictly, as they report weekly deaths due to falls that these safety guidelines can prevent. If you do not follow the safety guidelines, you will be penalized. In 2010, OSHA proposed a penalty to a company for letting their workers on the roofs without fall protection. This penalty fine amounted to $70,000 dollars. A fine like this is nothing compared to the guilt that stems from the death of an employee—especially a death that could have been prevented. Do not let this happen to your employees. Keep safety as your number one concern when operating aerial lifts.

Related Searches for Heavy Construction Equipment Parts  in Ashland County, Ohio.

Heavy Construction Equipment Parts Ashland County Ohio

Heavy Construction Equipment Parts Ashland County Ohio Real estate developers in New York know that when looking for JLG Lifts Parts, EQSLLC.Com is the company to contact! But did you know that EQSLLC.Com is a top supplier of heavy equipment parts in Ashland County, Ohio and neighboring areas. In disagreement with what [...]

2018-03-15T02:06:10+00:00