Heavy Construction Equipment Service & Repairs in or near Darby PA 2017-02-27T10:28:01+00:00

Heavy Equipment Repair in or near Darby PA

Heavy Equipment Repairs Allentown PA
Get Help

Searching for a reliable a Heavy & Construction Equipment Service and Repair Company in Darby PA. We service a wide range of heavy equipment ranging from Telehandlers to Generators from JLG, Genie, Lull, Bil-Jax, Skytrak, Gradall, Case, John Deere and much more.

Get Help

Heavy Construction Equipment Serice & Repair in Darby PA

Contractors insearch of good prices on Heavy Equipment Repair in or near Darby PA, are aware that EQS LLC, is the best heavy construction equipment company in Pennsylvania, and is the go to company for Heavy Equipment Serice & Repair in or near Darby PA. If you are a construction company in Darby PA you may need heavy construction equipment services. The reality is that with the amount of heavy construction equipment serice and repair companies in Darby PA it is at times hard to figure out a good one from an average outfit. When dealing with EQS there is nothing to worry about. For more a decade we have fulfill the needs of construction equiment rental facilities and more. By providing expert heavy equipment serice and repair in Darby PA and throughout the state.

Top Heavy Construction Equipment Serice & Repair Pros in Darby PA

If you construction equipment, we are sure, you have been approached about the serice and repair needs of it. Many of repair companies may even try to lock you down to a yearly service agreement. That is something you don’t have to worry about with EQS. From Articulating Boom Lifts to Push Arounds, we have you cover! we have been know as to go to guys for dependable heavy construction equipment repair that won’t let you down! For more information call 1.888.703-LIFT (5438) or use the contact form. On the other hand if you are just looking around visit our blog.

Darby PA Heavy Construction Equipment Services Blog Post

Best 6000 lb Telehandler To Rent


If you are in the market for renting a 6,000 pound telehandler, you have a lot of choices. While there are many, the main three telehandlers you will have to choose from are Genie, JLG, and SkyTrak. The best way to choose a telehandler for rent is to examine the specifications of each option and compare these to your job’s specifications.

Height is one of the most important specifications to consider when renting a telehandler. You will have to get a telehandler that reaches the height you need for your jobs. If you fail to do so and attempt reaching heights above the specified maximum height reach you will risk toppling over. Toppling over can result in injury and fatality. Another characteristic similar to this is reach. If you try to reach farther than the machine can safely reach, the machine might become unbalanced. This is another cause of toppling over.

If you are considering renting the SkyTrak telescopic forklift, know that this machine’s maximum lift height is 36 feet 1 inch. Its maximum horizontal reach is 22 feet 4 inches. The drawbar pull for this machine is 22,000 pounds. It has a frame leveling of 10 degrees. When it comes to lift capacity, the SkyTrak telehandler can handle 6,000 pounds at full height. At maximum reach however, it can only hold 1,800 pounds. When lifting, the maximum speed is 12 seconds. When lowering, the maximum speed is 9 seconds. When telescoping in and out, the maximum speed is 14 seconds. When traveling, the maximum speed is 19 miles per hour.

The 6,000 pound JLG telescopic forklift has an 18,000 pound drawbar pull. This machine has 4 forward gears and 3 reverse gears. When traveling, the JLG telehandler can go a speed of 19.5 miles per hour. The lift capacity for this machine at maximum height is 6,000 pounds. The JLG telehandler will lift up to 42 feet and reach forward to 29 feet. When extended fully, it can hold 1,000 pounds. When moving upwards it maintains a speed of 14 seconds. When moving down it moves at a speed of 10 seconds. When extending, the JLG telescopic forklift has a speed of 20 seconds. When retracting, the JLG has a speed of 8 seconds.

The Genie telehandler drawbar pull is a lot less than the JLG at 15,100 pounds. Instead of 4 forward gears, the Genie has only 3 forward gears and 3 reverse gears. When travelling forward, the Genie telescopic forklift moves at 18 miles per hour. It lifts up to 36 feet high and can hold 5,000 pounds at this height. It will reach 21 feet forward and can carry 1,500 pounds while extended for the full 21 feet. The Genie telehandler lifts up in 10 seconds and booms down in 8 seconds. It extends in 11 seconds and retracts in 9 seconds. All of the telehandlers mentioned run on diesel fuel.

When looking to rent one of these telehandlers, it is vital that you compare their specs to those of the jobs you intend to carry out using these machines. If you rent a machine with specs that do not match your job, you will not be able to safely and efficiently carry out that job. If you need further assistance choosing a 6,000 telehandler, contact our EQS experts for more information.

List of Construction Equipment Serice & Repair in or near Darby PA

Whether you are seeking for heavy equipment serice and repair in Darby PA or Harrisburg, PA we have you cover. EQS is known as one of the few A-Z repair shops around. We have provided developer quality heavy equipment service for some of the top brands in the business. At National Lift Equipment LLC we service and repair Shooting Boom Forklifts and Aerial Lifts from top names like Lull, Skyjack, Gradall, and more.