Heavy Construction Equipment Parts Wyandot County Ohio

equipment rental Myerstown PA

Equipment Services LLC parts department, a top supplier of heavy construction equipment in Wyandot County, Ohio. Equipment Services LLC is well known as the one go to company for JLG Scissor Lift Parts in Philadelphia but rapidly become a favorite with real estate developers in Wyandot County, Ohio. When your heavy construction machinery in need of repairs and you’re considering buying old machinery parts in lieu of a new one? While there are a lot of advantages to purchasing used parts, you should take extra caution when purchasinig them. Below are a few guidelines you can follow:

  1. Pick a respectable seller to purchase the parts.

You do not want to buy broken or mismatched parts. Be sure that you’re purchasing from a respectable seller so you can bring back the part to them in case it will not work. Also, most of these reputable shops offer a warranty on their parts.

  1. Know the history of the used equipment part

Always keep in mind that you are getting used machinery part, which means it could have gotten some wear and tear. Know specifically where the part was taken from and for how long that equipment has been used. It is also good to know if it is a used, repaired, or remanufactured part.

  1. Understand what you’re purchasing.

Equipment parts come in several kinds. Some parts may actually look similar but won’t work alike. Before going to a parts provider, make certain that you have all the information about your heavy equipment on hand, like its VIN number. You’ll never know if things like these will come handy.

New & Used Heavy Construction Equipment Wyandot County Ohio

Today is not difficult to locate used {genuine} heavy equipment and or construction equipment online. It is also not rare to get ripped off by shady characters. When you deal with Equipment Services LLC you are sure that you’re dealing with a reputable heavy equipment and or construction equipment parts dealer. If you are in need construction machinery parts, you generally have two options. You may purchase old or you may buy brand new. Each one has its own benefits and it is up to you to decide which way to go. If you decide to buy old machinery parts, below are more tips for you.

  1. But old but authentic parts.

Some machinery parts are removed from broken-down heavy construction equipment. While Others are produced by a third party. Check if you have a way of knowing which category the part you are purchasing belongs to. You’re better off with old but genuine parts.

  1. Know the part code.

When purchasing used heavy construction machinery parts, be certain that you have the part code with you. That assures you that you will get the actual part that you want. You might have to go through the trouble of finding out this detail, but it is all worth it in the end.

  1. Talk to the experts.

It pays to buy parts from people who have long years of experience in the field. This way, they can lead you to other places if they do not carry the part you want.

Old heavy equipment parts are best if your construction machinery is in need of repairs and a new part proves to be very expensive. Through these tips, you will surely end up with the perfect one. If you do not know about Equipment Services LLC we ask that you take a look at our blog.

Wyandot County Heavy Construction Equipment Related Post:

Best 6000 lb Telehandler To Rent

Construction Equipment Rental Essex County NJ

If you are in the market for renting a 6,000 pound telehandler, you have a lot of choices. While there are many, the main three telehandlers you will have to choose from are Genie, JLG, and SkyTrak. The best way to choose a telehandler for rent is to examine the specifications of each option and compare these to your job’s specifications.

Height is one of the most important specifications to consider when renting a telehandler. You will have to get a telehandler that reaches the height you need for your jobs. If you fail to do so and attempt reaching heights above the specified maximum height reach you will risk toppling over. Toppling over can result in injury and fatality. Another characteristic similar to this is reach. If you try to reach farther than the machine can safely reach, the machine might become unbalanced. This is another cause of toppling over.

If you are considering renting the SkyTrak telescopic forklift, know that this machine’s maximum lift height is 36 feet 1 inch. Its maximum horizontal reach is 22 feet 4 inches. The drawbar pull for this machine is 22,000 pounds. It has a frame leveling of 10 degrees. When it comes to lift capacity, the SkyTrak telehandler can handle 6,000 pounds at full height. At maximum reach however, it can only hold 1,800 pounds. When lifting, the maximum speed is 12 seconds. When lowering, the maximum speed is 9 seconds. When telescoping in and out, the maximum speed is 14 seconds. When traveling, the maximum speed is 19 miles per hour.

The 6,000 pound JLG telescopic forklift has an 18,000 pound drawbar pull. This machine has 4 forward gears and 3 reverse gears. When traveling, the JLG telehandler can go a speed of 19.5 miles per hour. The lift capacity for this machine at maximum height is 6,000 pounds. The JLG telehandler will lift up to 42 feet and reach forward to 29 feet. When extended fully, it can hold 1,000 pounds. When moving upwards it maintains a speed of 14 seconds. When moving down it moves at a speed of 10 seconds. When extending, the JLG telescopic forklift has a speed of 20 seconds. When retracting, the JLG has a speed of 8 seconds.

The Genie telehandler drawbar pull is a lot less than the JLG at 15,100 pounds. Instead of 4 forward gears, the Genie has only 3 forward gears and 3 reverse gears. When travelling forward, the Genie telescopic forklift moves at 18 miles per hour. It lifts up to 36 feet high and can hold 5,000 pounds at this height. It will reach 21 feet forward and can carry 1,500 pounds while extended for the full 21 feet. The Genie telehandler lifts up in 10 seconds and booms down in 8 seconds. It extends in 11 seconds and retracts in 9 seconds. All of the telehandlers mentioned run on diesel fuel.

When looking to rent one of these telehandlers, it is vital that you compare their specs to those of the jobs you intend to carry out using these machines. If you rent a machine with specs that do not match your job, you will not be able to safely and efficiently carry out that job. If you need further assistance choosing a 6,000 telehandler, contact our EQS experts for more information.

Related Searches for Heavy Equipment Parts  in Wyandot County, OH.

Heavy Construction Equipment Parts Wyandot County Ohio

Heavy Construction Equipment Parts Wyandot County Ohio Real estate developers in and around New York know that when looking for Biljax Parts, EQSLLC.Com is the company to call! But did you know that EQSLLC.Com is the #1 provider of heavy equipment parts in Wyandot County, Ohio and neighboring areas. Regardless of what [...]

2018-03-09T18:24:49+00:00