Heavy Construction Equipment Parts Trumbull County Ohio

equipment rental Birdsboro PA

Welcome to EQSLLC.Com parts department, a top rated supplier of heavy construction equipment in Trumbull County, Ohio. Equipment Services LLC is well known as the company go to company for JLG Boom Lift Parts in the Northeast but quickly become a favorite with people in and around Trumbull County, Ohio. When your construction machinery in dire need of repair and you’re considering purchasing used equipment parts in lieu of a new one? While there are many advantages to buying used parts, you must take extra caution when buying them. Below are a few guidelines you can follow:

  1. Pick a good place to get the parts.

You don’t want to get damaged or mismatched parts. Make sure that you’re purchasing from a reliable place so you may bring back the part to them in case it won’t work. Also, almost all of these trusted dealers offer a warranty on their products.

  1. Know the history of the used equipment part

Always remember that you are purchasing old equipment part, so it could have gone through some wear and tear. Find out precisely where the part was taken from and for how long that equipment has been working. It is also good to know if it is a used, repaired, or refurbished part.

  1. Know what you’re getting.

Machinery parts come in different kinds. A few parts may actually look similar but will not work in the same way. When talking to a seller, be sure that you have all the data about your heavy equipment at hand, like its VIN. You will never know if things like these can come handy.

New & Used Heavy Equipment And Or Construction Equipment Trumbull County OH

Nowadays is not hard to find new {genuine} heavy equipment and or construction equipment on the internet. it’s also not strange to get scammed by shady characters. When you deal with EQSLLC.Com you can be sure that you are dealing with a reputable construction equipment parts dealer. When you’re in need equipment parts, you technically have two choices. You may buy used or you may buy brand new. Each one has its own advantages and it’s up to you to choose. If you decide to get used machinery parts, below are more tips for you.

  1. Purchase old but authentic parts.

Some machinery parts are obtained from broken-down heavy construction equipment. While Others are produced by a third party. See if you have some way of knowing which group the part you are buying falls under. You’re better off with old but authentic parts.

  1. Use the part code.

When purchasing used heavy construction equipment parts, be sure that you have the part code available. That assures you that you will get hold of the actual part that you require. You may have to go through the trouble of knowing this information, but it’ll be all worth it in the end.

  1. Ask the right people.

It pays to buy parts from dealers who have long years of knowledge in the business. If you do, they can lead you to other stores if they don’t sell the part you want.

Old construction equipment parts are good if your construction machinery is in need of repair and a brand new part seems to be too costly. With these guidelines, you’ll surely buy the best one. If you do not know of Equipment Services LLC we ask that you take a look at our blog.

Trumbull County Heavy Equipment Related Articles:

Best 6000 lb Telehandler To Rent

Heavy Equipment Repairs Newark NJ

If you are in the market for renting a 6,000 pound telehandler, you have a lot of choices. While there are many, the main three telehandlers you will have to choose from are Genie, JLG, and SkyTrak. The best way to choose a telehandler for rent is to examine the specifications of each option and compare these to your job’s specifications.

Height is one of the most important specifications to consider when renting a telehandler. You will have to get a telehandler that reaches the height you need for your jobs. If you fail to do so and attempt reaching heights above the specified maximum height reach you will risk toppling over. Toppling over can result in injury and fatality. Another characteristic similar to this is reach. If you try to reach farther than the machine can safely reach, the machine might become unbalanced. This is another cause of toppling over.

If you are considering renting the SkyTrak telescopic forklift, know that this machine’s maximum lift height is 36 feet 1 inch. Its maximum horizontal reach is 22 feet 4 inches. The drawbar pull for this machine is 22,000 pounds. It has a frame leveling of 10 degrees. When it comes to lift capacity, the SkyTrak telehandler can handle 6,000 pounds at full height. At maximum reach however, it can only hold 1,800 pounds. When lifting, the maximum speed is 12 seconds. When lowering, the maximum speed is 9 seconds. When telescoping in and out, the maximum speed is 14 seconds. When traveling, the maximum speed is 19 miles per hour.

The 6,000 pound JLG telescopic forklift has an 18,000 pound drawbar pull. This machine has 4 forward gears and 3 reverse gears. When traveling, the JLG telehandler can go a speed of 19.5 miles per hour. The lift capacity for this machine at maximum height is 6,000 pounds. The JLG telehandler will lift up to 42 feet and reach forward to 29 feet. When extended fully, it can hold 1,000 pounds. When moving upwards it maintains a speed of 14 seconds. When moving down it moves at a speed of 10 seconds. When extending, the JLG telescopic forklift has a speed of 20 seconds. When retracting, the JLG has a speed of 8 seconds.

The Genie telehandler drawbar pull is a lot less than the JLG at 15,100 pounds. Instead of 4 forward gears, the Genie has only 3 forward gears and 3 reverse gears. When travelling forward, the Genie telescopic forklift moves at 18 miles per hour. It lifts up to 36 feet high and can hold 5,000 pounds at this height. It will reach 21 feet forward and can carry 1,500 pounds while extended for the full 21 feet. The Genie telehandler lifts up in 10 seconds and booms down in 8 seconds. It extends in 11 seconds and retracts in 9 seconds. All of the telehandlers mentioned run on diesel fuel.

When looking to rent one of these telehandlers, it is vital that you compare their specs to those of the jobs you intend to carry out using these machines. If you rent a machine with specs that do not match your job, you will not be able to safely and efficiently carry out that job. If you need further assistance choosing a 6,000 telehandler, contact our EQS experts for more information.

Related Searches for Heavy Equipment Parts  in Trumbull County, OH.

Heavy Construction Equipment Parts Trumbull County Ohio

Heavy Construction Equipment Parts Trumbull County Ohio Everyone in the Northeast know that if looking for JLG Parts, Equipment Services LLC is the company to contact! But did you know that Equipment Services LLC is the #1 provider of heavy equipment parts in Trumbull County, Ohio and neighboring areas. Regardless of what [...]

2018-03-14T21:01:03+00:00