Heavy Construction Equipment Parts Troy Ohio

equipment rental Trevose PA

Welcome to Equipment Services LLC parts department, a top supplier of heavy construction equipment in Troy, OH. Equipment Services LLC is well known as the one go to company for Man Lift Parts in New Jersey but quickly become a favorite with contractors in Troy, OH. If your heavy construction equipment in dire need of repairs and you are looking at buying used machinery parts instead of a new one? While there are a lot of benefits to purchasing old parts, you must take extra caution when purchasinig them. Below are a few guidelines you can follow:

  1. Select a trusted place to purchase the parts.

You do not want to end up with broken or incompatible parts. Make certain that you’re buying from a trusted shop so you could bring back the part to them if it doesn’t work. Also, almost all of these trusted places offer a warranty on their items.

  1. Find out the history of the used machinery part

Always remember that you’re purchasing used machinery part, which means it may have gotten some wear and tear. Know specifically where the part came from and for how long that equipment has been used. It also pays to know if it is a used, repaired, or refurbished part.

  1. Understand what you are buying.

Equipment parts come in different kinds. Several parts may even look alike but will not work in the same way. Before going to a seller, be sure that you have all the data about your construction machinery available, like its VIN. You never know when things such as these can come handy.

New & Used Heavy Construction Equipment Troy OH

Nowadays is not difficult to find used {genuine} heavy construction equipment online. it’s also not strange to get scammed by less than honest characters. When you deal with EQSLLC.Com you can be sure that you’re dealing with a reputable heavy equipment and or construction equipment parts dealer. When you need heavy equipment parts, you generally have two options. You can purchase used or you can buy brand new. Each one has its own advantages and it is up to you to decide which way to go. If you decide to get used equipment parts, below are more guidelines for you.

  1. Purchase used but genuine parts.

Some equipment parts are removed from junked heavy machinery. While Others are manufactured by another company. See if you have a way of knowing which group the part you are getting falls under. You are better off with used yet authentic parts.

  1. Get the part code.

When getting used heavy construction equipment parts, make sure that you give the part code available. It assures you that you’ll get hold of the exact part that you need. You might have to go through the trouble of finding out this detail, but it will be all worth it in the end.

  1. Consult the experts.

It pays to buy parts from dealers who have long years of knowledge in the field. If you do, they could refer you to other stores if they don’t sell the part you want.

Used construction machinery parts are good if your heavy machinery in dire need of repair and a new part proves to be too costly. With these tips, you’ll certainly end up with the right choice. If you never heard of of EQSLLC.Com we ask that you check out at our blog.

Troy Construction Equipment Related Blogs:

Best 6000 lb Telehandler To Rent

equipment rental Myerstown PA

If you are in the market for renting a 6,000 pound telehandler, you have a lot of choices. While there are many, the main three telehandlers you will have to choose from are Genie, JLG, and SkyTrak. The best way to choose a telehandler for rent is to examine the specifications of each option and compare these to your job’s specifications.

Height is one of the most important specifications to consider when renting a telehandler. You will have to get a telehandler that reaches the height you need for your jobs. If you fail to do so and attempt reaching heights above the specified maximum height reach you will risk toppling over. Toppling over can result in injury and fatality. Another characteristic similar to this is reach. If you try to reach farther than the machine can safely reach, the machine might become unbalanced. This is another cause of toppling over.

If you are considering renting the SkyTrak telescopic forklift, know that this machine’s maximum lift height is 36 feet 1 inch. Its maximum horizontal reach is 22 feet 4 inches. The drawbar pull for this machine is 22,000 pounds. It has a frame leveling of 10 degrees. When it comes to lift capacity, the SkyTrak telehandler can handle 6,000 pounds at full height. At maximum reach however, it can only hold 1,800 pounds. When lifting, the maximum speed is 12 seconds. When lowering, the maximum speed is 9 seconds. When telescoping in and out, the maximum speed is 14 seconds. When traveling, the maximum speed is 19 miles per hour.

The 6,000 pound JLG telescopic forklift has an 18,000 pound drawbar pull. This machine has 4 forward gears and 3 reverse gears. When traveling, the JLG telehandler can go a speed of 19.5 miles per hour. The lift capacity for this machine at maximum height is 6,000 pounds. The JLG telehandler will lift up to 42 feet and reach forward to 29 feet. When extended fully, it can hold 1,000 pounds. When moving upwards it maintains a speed of 14 seconds. When moving down it moves at a speed of 10 seconds. When extending, the JLG telescopic forklift has a speed of 20 seconds. When retracting, the JLG has a speed of 8 seconds.

The Genie telehandler drawbar pull is a lot less than the JLG at 15,100 pounds. Instead of 4 forward gears, the Genie has only 3 forward gears and 3 reverse gears. When travelling forward, the Genie telescopic forklift moves at 18 miles per hour. It lifts up to 36 feet high and can hold 5,000 pounds at this height. It will reach 21 feet forward and can carry 1,500 pounds while extended for the full 21 feet. The Genie telehandler lifts up in 10 seconds and booms down in 8 seconds. It extends in 11 seconds and retracts in 9 seconds. All of the telehandlers mentioned run on diesel fuel.

When looking to rent one of these telehandlers, it is vital that you compare their specs to those of the jobs you intend to carry out using these machines. If you rent a machine with specs that do not match your job, you will not be able to safely and efficiently carry out that job. If you need further assistance choosing a 6,000 telehandler, contact our EQS experts for more information.

Related Searches for Construction Equipment Parts  in Troy, OH.

Heavy Construction Equipment Parts Troy Ohio

Heavy Construction Equipment Parts Troy Ohio People in New Jersey know that if looking for Biljax Parts, EQSLLC.Com is the one to contact! But did you know that Equipment Services LLC is the top supplier of heavy equipment parts in Troy, OH and neighboring areas. Regardless of what you may think there're [...]

2018-03-01T03:17:37+00:00