Heavy Construction Equipment Parts Tallmadge Ohio

Heavy Equipment Repairs Carmichaels PA

Equipment Services LLC parts department, a top rated supplier of construction equipment in Tallmadge, OH. Equipment Services LLC is well known as the company go to company for Aerial Lift Parts in New York but quickly become a favorite with contractors in and around Tallmadge, Ohio. If your heavy construction equipment require repair and you are looking at purchasing old equipment parts instead of a new one? While there are many advantages to buying old parts, you should take extra caution when buying them. Below are some guidelines you can follow:

  1. Pick a respectable store to buy the parts.

You do not want to end up with damaged or unusable parts. Make sure that you’re getting it from a respectable store so you can return the part to them if it won’t work. Also, almost all of these reputable shops offer a warranty on their parts.

  1. Learn about the background of the used machinery part

Always keep in mind that you’re buying old machinery part, so it may have gone through some wear and tear. Find out exactly where the part came from and for how long that machinery has been used. It is also good to know if it is a used, repaired, or refurbished part.

  1. Know what you’re getting.

Equipment parts come in different kinds. Some parts may even look the same but won’t work in the same way. Before buying from a seller, be certain that you have all the data about your construction machinery at hand, like its vehicle identification number. You’ll never know when things such as these can come handy.

New & Used Heavy Equipment Tallmadge OH

Today is not hard to locate new or used {genuine} heavy construction equipment on the internet. it’s also not strange to get scammed by shady characters. When you deal with Equipment Services LLC you can be sure that you’re dealing with authorized construction equipment parts dealer. If you need equipment parts, you normally have two options. You can buy old or you can buy brand new. Each option has its own benefits and it is up to you to weigh them out. If you choose to buy old equipment parts, below are more tips for you.

  1. But old but authentic parts.

Most equipment parts are acquired from broken-down heavy construction equipment. Some are produced by a third party. Check if you have some way of knowing which group the part you’re getting falls under. You are better off with old yet authentic parts.

  1. Give the part code.

When purchasing old heavy construction machinery parts, be sure that you give the part code with you. Doing so assures you that you’ll be given the exact part that you require. You may have to go through the pains of knowing this information, but it’s all worth it in the end.

  1. Ask the right people.

It pays to get parts from people who have long years of knowledge in the field. This way, they can point you to other places if they don’t sell the part you want.

Used heavy machinery parts are advisable if your heavy machinery in dire need of repairs and a new part seems to be too costly. With these guidelines, you will surely get the best one. If you do not know of EQSLLC.Com we ask that you visit at our blog.

Tallmadge Heavy Equipment Related Blog Post:

Best 8000 lb Telehandler

equipment rental Telford PA

Telehandler rental customers in today’s society are offered many options, which can be both a blessing and a curse. While there is often an option for each possible need, the variety telehandler for rent with many makes and models can make it hard to choose a machine. When searching for the right telehandler to rent, it is important to look at the specifications of each machine in comparison to what you need for your job. You want to find the best fit at the lowest price, as this is how you get the most bang for your buck.

One of the many characteristics that are detrimental to renting a telehandler is the working height. You cannot accomplish a task at 50 feet if your telehandler only reaches 48 feet. When comparing the 8,000 Lb SkyTrak telehandler and Genie telehandlers, the working heights are actually quite similar. The Genie telescopic forklift has a maximum lift height of 43 feet and 10 inches. The maximum lift height for a SkyTrak telescopic forklift is only slightly lower at 41 feet 11 and inches. If you need the extra 2 feet, opt for the Genie. If this difference does not seem significant to your job, it is important that you closely examine more characteristics to find exactly what your needs are for your next job.

Similar to the lift height, you also need to make sure the telehandler you choose has an adequate horizontal reach distance. The Genie telehandler has a horizontal reach of 27 feet, while the SkyTrak has a horizontal reach of approximately 26 feet 7 inches. If you try to reach beyond these distances, you run the risk of toppling over or putting excessive stress on the machine and potentially damaging it. This is extremely dangerous as it can result in injury and even fatality. To stay safe during your job, make sure you choose the 8,000 pound telehandler with a reach distance that meets your needs.

A less important factor that you may want to consider is speed. The drive speed for the Genie telehandler is 15 miles per hour. The maximum travel speed for the SkyTrak is 19 miles per hour. The SkyTrak telehandler lift speed is 15 seconds and the lower speed is 13 seconds. It telescopes in at 14 seconds and out at 17 seconds. The Genie has a lift speed of 15 seconds and a lower speed of 11 seconds. The Genie telescopes in at 18 seconds and out at 14 seconds. As you can see, the SkyTrak moves at a faster pace when traveling. It also moves faster when in use. Therefore, if you value speed you should opt for the SkyTrack model over the Genie model.

The SkyTrak machine weights 22,600 pounds. The Genie weights slightly less than the SkyTrak at about 22,500 pounds. If you are looking for a lighter machine, you should choose the Genie. Lighter weight could mean easier transport and better fuel economy.

If you are interested in finding the right 8,000 pound telehandler and seek further assistance, feel free to contact the experts here at Equipment Services. We will be happy to walk you through the process to ensure that you find a telehandler that meets all of your needs for your next job.

Related Searches for Construction Equipment Parts  in Tallmadge, Ohio.

Heavy Construction Equipment Parts Tallmadge Ohio

Heavy Construction Equipment Parts Tallmadge Ohio Construction companies in Massachusetts know that when looking for Scissor Lifts Parts, EQSLLC.Com is the company to reach out to! But did you know that Equipment Services LLC is the top supplier of heavy equipment parts in Tallmadge, Ohio and neighboring areas. Regardless of what you [...]

2018-03-03T16:57:04+00:00