Heavy Construction Equipment Parts Shaker Heights Ohio

equipment rental Upper Darby PA

Welcome to Equipment Services LLC parts department, a top rated supplier of heavy construction equipment in Shaker Heights, OH. EQSLLC.Com is well known as the one go to company for JLG T350 Parts in New York but rapidly become a favorite with everyone in and around Shaker Heights, Ohio. When your heavy construction equipment require repairs and you’re considering buying old machinery parts instead of a new one? While there are many advantages to buying old parts, you must be extra careful when buying them. Below are a few guidelines you can follow:

  1. Choose a trusted seller to purchase the parts.

You don’t want to get damaged or mismatched parts. Make sure that you are buying from a reputable shop so you can bring back the part to them in case it doesn’t work. Also, almost all of these reputable shops offer a warranty on their items.

  1. Find out the history of the old equipment part

Always remember that you are buying used equipment part, so it could have gone through some wear and tear. Know exactly where the part came from and for how long that equipment has been used. It is also good to know if it is an old, repaired, or remanufactured part.

  1. Understand what you’re purchasing.

Machinery parts come in different types. Several parts may even look similar but will not perform similarly. Before talking to a parts provider, make sure that you bring all the data about your heavy equipment on hand, like its VIN. You never know when things like these can come handy.

New & Used Heavy Equipment And Or Construction Equipment Shaker Heights Ohio

Nowadays is not hard to locate new or used {genuine} heavy equipment and or construction equipment online. It is also not strange to get ripped off by less than honest characters. When you deal with EQSLLC.Com you are sure that you are dealing with a reputable heavy equipment and or construction equipment parts dealer. If you need construction machinery parts, you technically have two options. You can buy used or you can purchase brand new. Each option has its own benefits and it’s up to you to decide which way to go. If you want to get used equipment parts, below are more tips for you.

  1. Purchase old but authentic parts.

Several machinery parts are acquired from junked heavy construction equipment. While Others are manufactured by a third party. Check if you have some way of knowing which group the part you are getting belongs to. You’re better off with old but authentic parts.

  1. Give the part code.

When purchasing used heavy construction equipment parts, make certain that you give the part code with you. That ensures you that you will be given the actual part that you want. You may have to go through the pains of finding out this information, but it will be all worth it in the end.

  1. Talk to the right people.

It pays to purchase parts from providers who have long years of knowledge in the field. If you do, they can refer you to other stores if they do not carry the part you want.

Used construction machinery parts are good if your construction machinery is in need of repairs and a new part seems to be too expensive. Through these guidelines, you will surely get the right one. If you have heard of about Equipment Services LLC we ask that you visit at our blog.

Shaker Heights Heavy Equipment Related Articles:

Best 6000 lb Telehandler To Rent

equipment rental Ridley Park PA

If you are in the market for renting a 6,000 pound telehandler, you have a lot of choices. While there are many, the main three telehandlers you will have to choose from are Genie, JLG, and SkyTrak. The best way to choose a telehandler for rent is to examine the specifications of each option and compare these to your job’s specifications.

Height is one of the most important specifications to consider when renting a telehandler. You will have to get a telehandler that reaches the height you need for your jobs. If you fail to do so and attempt reaching heights above the specified maximum height reach you will risk toppling over. Toppling over can result in injury and fatality. Another characteristic similar to this is reach. If you try to reach farther than the machine can safely reach, the machine might become unbalanced. This is another cause of toppling over.

If you are considering renting the SkyTrak telescopic forklift, know that this machine’s maximum lift height is 36 feet 1 inch. Its maximum horizontal reach is 22 feet 4 inches. The drawbar pull for this machine is 22,000 pounds. It has a frame leveling of 10 degrees. When it comes to lift capacity, the SkyTrak telehandler can handle 6,000 pounds at full height. At maximum reach however, it can only hold 1,800 pounds. When lifting, the maximum speed is 12 seconds. When lowering, the maximum speed is 9 seconds. When telescoping in and out, the maximum speed is 14 seconds. When traveling, the maximum speed is 19 miles per hour.

The 6,000 pound JLG telescopic forklift has an 18,000 pound drawbar pull. This machine has 4 forward gears and 3 reverse gears. When traveling, the JLG telehandler can go a speed of 19.5 miles per hour. The lift capacity for this machine at maximum height is 6,000 pounds. The JLG telehandler will lift up to 42 feet and reach forward to 29 feet. When extended fully, it can hold 1,000 pounds. When moving upwards it maintains a speed of 14 seconds. When moving down it moves at a speed of 10 seconds. When extending, the JLG telescopic forklift has a speed of 20 seconds. When retracting, the JLG has a speed of 8 seconds.

The Genie telehandler drawbar pull is a lot less than the JLG at 15,100 pounds. Instead of 4 forward gears, the Genie has only 3 forward gears and 3 reverse gears. When travelling forward, the Genie telescopic forklift moves at 18 miles per hour. It lifts up to 36 feet high and can hold 5,000 pounds at this height. It will reach 21 feet forward and can carry 1,500 pounds while extended for the full 21 feet. The Genie telehandler lifts up in 10 seconds and booms down in 8 seconds. It extends in 11 seconds and retracts in 9 seconds. All of the telehandlers mentioned run on diesel fuel.

When looking to rent one of these telehandlers, it is vital that you compare their specs to those of the jobs you intend to carry out using these machines. If you rent a machine with specs that do not match your job, you will not be able to safely and efficiently carry out that job. If you need further assistance choosing a 6,000 telehandler, contact our EQS experts for more information.

Related Searches for Construction Equipment Parts  in Shaker Heights, Ohio.

Heavy Construction Equipment Parts Shaker Heights Ohio

Heavy Construction Equipment Parts Shaker Heights Ohio Everyone in New York know that when looking for Aerial Lift Parts, Equipment Services LLC is the one to contact. But did you know that EQSLLC.Com is the #1 provider of heavy equipment parts in Shaker Heights, OH and neighboring areas. In disagreement with what [...]

2018-03-05T23:28:19+00:00