Heavy Construction Equipment Parts Ontario Ohio

equipment rental Shippensburg PA

EQSLLC.Com parts department, a top rated supplier of construction equipment in Ontario, OH. Equipment Services LLC is well known as the company go to company for Man Lift Parts in the Northeast but rapidly become a favorite with contractors in and around Ontario, OH. When your construction equipment in need of repair and you’re looking at purchasing old equipment parts in lieu of a new one? While there are several advantages to purchasing used parts, you must be extra careful when buying them. Below are three guidelines you can follow:

  1. Choose a good place to get the parts.

You don’t want to buy damaged or mismatched parts. Make certain that you are buying from a respectable place so you could bring back the part to them in case it does not work. Also, most of these reputable places offer a guarantee on their items.

  1. Know the history of the old equipment part

Always remember that you are purchasing old machinery part, so it may have gone through some wear and tear. Find out precisely where the part was taken from and for how long that equipment has been working. It is also good to know if it is an old, repaired, or refurbished part.

  1. Understand what you’re purchasing.

Equipment parts come in several kinds. Several parts may actually look similar but won’t function similarly. When talking to a parts provider, make sure that you bring all the data about your construction machinery at hand, like its VIN. You never know if things like these will come handy.

Genuine Heavy Construction Equipment Ontario OH

Today is not hard to locate used {genuine} heavy equipment and or construction equipment online. it’s also not rare to get ripped off by less than legit characters. When you deal with EQSLLC.Com you are sure that you are dealing with authorized heavy construction equipment parts dealer. If you need equipment parts, you generally have two options. You can buy old or you can purchase new. Each one has its own advantages and it’s up to you to decide which way to go. If you choose to get old machinery parts, below are more tips for you.

  1. But used yet authentic parts.

Most machinery parts are obtained from broken-down heavy machinery. Others are produced by another company. See if you have a way of knowing which category the part you’re purchasing belongs to. You are better off with used but authentic parts.

  1. Know the part code.

When getting used heavy construction machinery parts, be certain that you have the part code available. That ensures you that you’ll get hold of the exact part that you want. You may have to go through the trouble of finding out this information, but it’ll be all worth it in the end.

  1. Talk to the right people.

It pays to buy parts from people who have many years of experience in the field. This way, they can refer you to other shops if they don’t have the part you want.

Old heavy machinery parts are advisable if your heavy machinery in dire need of repairs and a brand new part seems to be too expensive. With these tips, you will definitely get the best choice. If you do not know of EQSLLC.Com we encourage that you check out at our blog.

Ontario Heavy Construction Equipment Related Blogs:

Best 6000 lb Telehandler To Rent

Heavy Equipment Repairs Essex County NJ

If you are in the market for renting a 6,000 pound telehandler, you have a lot of choices. While there are many, the main three telehandlers you will have to choose from are Genie, JLG, and SkyTrak. The best way to choose a telehandler for rent is to examine the specifications of each option and compare these to your job’s specifications.

Height is one of the most important specifications to consider when renting a telehandler. You will have to get a telehandler that reaches the height you need for your jobs. If you fail to do so and attempt reaching heights above the specified maximum height reach you will risk toppling over. Toppling over can result in injury and fatality. Another characteristic similar to this is reach. If you try to reach farther than the machine can safely reach, the machine might become unbalanced. This is another cause of toppling over.

If you are considering renting the SkyTrak telescopic forklift, know that this machine’s maximum lift height is 36 feet 1 inch. Its maximum horizontal reach is 22 feet 4 inches. The drawbar pull for this machine is 22,000 pounds. It has a frame leveling of 10 degrees. When it comes to lift capacity, the SkyTrak telehandler can handle 6,000 pounds at full height. At maximum reach however, it can only hold 1,800 pounds. When lifting, the maximum speed is 12 seconds. When lowering, the maximum speed is 9 seconds. When telescoping in and out, the maximum speed is 14 seconds. When traveling, the maximum speed is 19 miles per hour.

The 6,000 pound JLG telescopic forklift has an 18,000 pound drawbar pull. This machine has 4 forward gears and 3 reverse gears. When traveling, the JLG telehandler can go a speed of 19.5 miles per hour. The lift capacity for this machine at maximum height is 6,000 pounds. The JLG telehandler will lift up to 42 feet and reach forward to 29 feet. When extended fully, it can hold 1,000 pounds. When moving upwards it maintains a speed of 14 seconds. When moving down it moves at a speed of 10 seconds. When extending, the JLG telescopic forklift has a speed of 20 seconds. When retracting, the JLG has a speed of 8 seconds.

The Genie telehandler drawbar pull is a lot less than the JLG at 15,100 pounds. Instead of 4 forward gears, the Genie has only 3 forward gears and 3 reverse gears. When travelling forward, the Genie telescopic forklift moves at 18 miles per hour. It lifts up to 36 feet high and can hold 5,000 pounds at this height. It will reach 21 feet forward and can carry 1,500 pounds while extended for the full 21 feet. The Genie telehandler lifts up in 10 seconds and booms down in 8 seconds. It extends in 11 seconds and retracts in 9 seconds. All of the telehandlers mentioned run on diesel fuel.

When looking to rent one of these telehandlers, it is vital that you compare their specs to those of the jobs you intend to carry out using these machines. If you rent a machine with specs that do not match your job, you will not be able to safely and efficiently carry out that job. If you need further assistance choosing a 6,000 telehandler, contact our EQS experts for more information.

Related Searches for Heavy Construction Equipment Parts  in Ontario, OH.

Heavy Construction Equipment Parts Ontario Ohio

Heavy Construction Equipment Parts Ontario Ohio Construction companies in Massachusetts know that if looking for Biljax Parts, Equipment Services LLC is the company to contact! But did you know that Equipment Services LLC is the top supplier of heavy equipment parts in Ontario, OH and neighboring areas. Regardless of what you may [...]

2018-03-11T16:20:52+00:00