Heavy Construction Equipment Parts Hocking County Ohio

equipment rental Middleburg PA

Equipment Services LLC parts department, a top rated supplier of heavy construction equipment in Hocking County, Ohio. Equipment Services LLC is well known as the company go to company for Bil Jax Parts in New York but quickly become a favorite with people in and around Hocking County, OH. If your construction machinery in need of repairs and you’re looking at purchasing used equipment parts instead of a new one? While there are a lot of advantages to purchasing old parts, you must take extra caution when purchasinig them. Below are a few guidelines you can follow:

  1. Select a reputable dealer to get the parts.

You do not want to purchase broken or mismatched parts. Make sure that you are purchasing from a reputable seller so you could return the part to them if it does not work. Also, most of these reputable places offer a warranty on their products.

  1. Know the history of the used machinery part

Always remember that you’re buying old equipment part, which means it may have gone through some wear and tear. Know exactly where the part was taken from and for how long that equipment has been working. It is also good to know if it is an old, repaired, or remanufactured part.

  1. Know what you are purchasing.

Machinery parts come in several kinds. Some parts may actually look alike but won’t perform alike. Before buying from a dealer, make sure that you bring all the data about your construction equipment at hand, like its VIN number. You will never know when things like these will come handy.

New & Used Heavy Construction Equipment Hocking County OH

Today is not hard to find new or used {genuine} heavy construction equipment online. it’s also not strange to get scammed by less than honest characters. When you deal with Equipment Services LLC you are sure that you’re dealing with authorized heavy equipment parts dealer. If you need heavy equipment parts, you generally have two choices. You can purchase old or you can buy new. Each option has its own benefits and it is up to you to choose. If you want to get old equipment parts, below are more guidelines for you.

  1. Get used yet genuine parts.

Most equipment parts are obtained from junked heavy construction equipment. Others are manufactured by a third party. Check if you have some way of knowing which group the part you are buying belongs to. You’re better off with used yet authentic parts.

  1. Use the part code.

When buying used heavy construction equipment parts, be sure that you give the part code with you. It assures you that you will get hold of the exact part that you want. You might have to go through the trouble of knowing this detail, but it is all worth it in the end.

  1. Talk to the experts.

It pays to purchase parts from dealers who have long years of knowledge in the field. This way, they could refer you to other shops if they don’t sell the part you need.

Old heavy machinery parts are good if your construction machinery in dire need of repair and a brand new part proves to be very expensive. With these guidelines, you will surely get the best choice. If by any chance you have heard of of Equipment Services LLC we encourage that you take a look at our blog.

Hocking County Heavy Equipment Related Articles:

Best 6000 lb Telehandler To Rent

equipment rental Newtown PA

If you are in the market for renting a 6,000 pound telehandler, you have a lot of choices. While there are many, the main three telehandlers you will have to choose from are Genie, JLG, and SkyTrak. The best way to choose a telehandler for rent is to examine the specifications of each option and compare these to your job’s specifications.

Height is one of the most important specifications to consider when renting a telehandler. You will have to get a telehandler that reaches the height you need for your jobs. If you fail to do so and attempt reaching heights above the specified maximum height reach you will risk toppling over. Toppling over can result in injury and fatality. Another characteristic similar to this is reach. If you try to reach farther than the machine can safely reach, the machine might become unbalanced. This is another cause of toppling over.

If you are considering renting the SkyTrak telescopic forklift, know that this machine’s maximum lift height is 36 feet 1 inch. Its maximum horizontal reach is 22 feet 4 inches. The drawbar pull for this machine is 22,000 pounds. It has a frame leveling of 10 degrees. When it comes to lift capacity, the SkyTrak telehandler can handle 6,000 pounds at full height. At maximum reach however, it can only hold 1,800 pounds. When lifting, the maximum speed is 12 seconds. When lowering, the maximum speed is 9 seconds. When telescoping in and out, the maximum speed is 14 seconds. When traveling, the maximum speed is 19 miles per hour.

The 6,000 pound JLG telescopic forklift has an 18,000 pound drawbar pull. This machine has 4 forward gears and 3 reverse gears. When traveling, the JLG telehandler can go a speed of 19.5 miles per hour. The lift capacity for this machine at maximum height is 6,000 pounds. The JLG telehandler will lift up to 42 feet and reach forward to 29 feet. When extended fully, it can hold 1,000 pounds. When moving upwards it maintains a speed of 14 seconds. When moving down it moves at a speed of 10 seconds. When extending, the JLG telescopic forklift has a speed of 20 seconds. When retracting, the JLG has a speed of 8 seconds.

The Genie telehandler drawbar pull is a lot less than the JLG at 15,100 pounds. Instead of 4 forward gears, the Genie has only 3 forward gears and 3 reverse gears. When travelling forward, the Genie telescopic forklift moves at 18 miles per hour. It lifts up to 36 feet high and can hold 5,000 pounds at this height. It will reach 21 feet forward and can carry 1,500 pounds while extended for the full 21 feet. The Genie telehandler lifts up in 10 seconds and booms down in 8 seconds. It extends in 11 seconds and retracts in 9 seconds. All of the telehandlers mentioned run on diesel fuel.

When looking to rent one of these telehandlers, it is vital that you compare their specs to those of the jobs you intend to carry out using these machines. If you rent a machine with specs that do not match your job, you will not be able to safely and efficiently carry out that job. If you need further assistance choosing a 6,000 telehandler, contact our EQS experts for more information.

Related Searches for Heavy Equipment And Or Construction Equipment Parts  in Hocking County, Ohio.

Heavy Construction Equipment Parts Hocking County Ohio

Heavy Construction Equipment Parts Hocking County Ohio Contractors in New Jersey know that if looking for Bil Jax Parts, Equipment Services LLC is the one to call. But did you know that Equipment Services LLC is the top provider of heavy equipment parts in Hocking County, OH and neighboring areas. In disagreement [...]

2018-03-04T07:37:51+00:00