Heavy Construction Equipment Parts Hillsboro Ohio

equipment rental Quakertown PA

EQSLLC.Com parts department, a top supplier of heavy equipment and or construction equipment in Hillsboro, Ohio. Equipment Services LLC is well known as the company go to company for JLG Lift Parts in Philadelphia but quickly become a favorite with construction companies in and around Hillsboro, OH. If your construction machinery in dire need of repairs and you are looking at purchasing old machinery parts in lieu of a new one? While there are many advantages to buying old parts, you must be extra careful when buying them. Below are some tips you can follow:

  1. Pick a reliable store to buy the parts.

You don’t want to get damaged or incompatible parts. Be sure that you’re buying from a respectable place so you could return the part to them if it won’t work. Also, most of these reliable shops offer a warranty on their items.

  1. Find out the history of the old machinery part

Always remember that you’re purchasing used machinery part, so it could have gone through some wear and tear. Find out specifically where the part was taken from and the length of time that equipment has been working. It is also good to know if it is a used, repaired, or refurbished part.

  1. Know what you are purchasing.

Equipment parts come in different kinds. Some parts may actually look the same but won’t function in the same way. When going to a parts provider, be sure that you have all the information about your heavy machinery on hand, like its VIN. You never know when things like these can come handy.

New & Used Heavy Equipment Hillsboro Ohio

Nowadays is not difficult to locate new or used {genuine} heavy equipment on the internet. it’s also not strange to get ripped off by less than honest characters. When you deal with Equipment Services LLC you can be sure that you’re dealing with a reputable heavy equipment and or construction equipment parts dealer. If you’re in need construction machinery parts, you normally have two options. You may buy used or you may purchase new. Each one has its own advantages and it is up to you to weigh them out. If you decide to get old equipment parts, below are more tips for you.

  1. Get used but authentic parts.

Several machinery parts are removed from junked heavy construction equipment. Others are manufactured by a third party. Check if you have some way of knowing which category the part you’re buying falls under. You are better off with used yet genuine parts.

  1. Give the part code.

When getting used heavy construction equipment parts, make sure that you give the part code with you. Doing so ensures you that you will get hold of the actual part that you need. You might have to go through the trouble of finding out this information, but it will be all worth it in the end.

  1. Consult the experts.

It pays to get parts from dealers who have many years of knowledge in the field. This way, they could point you to other dealers if they don’t sell the part you want.

Used construction machinery parts are great if your heavy machinery is in need of repairs and a new part seems to be very costly. With these guidelines, you’ll surely purchase the best choice. If you don’t know of Equipment Services LLC we ask that you take a look at our blog.

Hillsboro Heavy Equipment And Or Construction Equipment Related Blogs:

How to develop a fall prevention plan when using aerial lifts?

Heavy Equipment Repairs Jersey City NJ

Safety is of utmost importance when it comes to dangerous construction work. In order to reduce injury and fatality of your employees, you must develop a fall prevention plan when using aerial lifts. OSHA modified their fall protection guidelines in the year 2010 to reduce injuries and fatalities in the residential construction workplace. Under the new guidelines, construction jobs that require an employee to be above 6 feet in the air must take certain precautions such as guardrail systems, safety net systems, and personal fall arrest systems. This is not necessary if and only if the employer proves that the safety systems do more harm than good. If the employer successfully proves that the safety systems are a hazard to their employees, they are required to instead implement a fall protection plan.

The fall protection plan must first be created by the employer. After it has been created, it must be submitted to a qualified person to be approved. This protection plan must be re-approved each time a change is made. If working in an aerial lift or scissor lift platform, employers must have the guardrail system in place or tied off. There are many methods for tie-offs, but the three acceptable ones are restraint systems, positioning devices, and fall arrest systems.

A restraint system consists solely of a body belt and a harness. When using a restraint system, the employer must create a fall protection plan in case an employee falls from a great distance.

Positioning devices are commonly used in construction work. A positioning device is a body belt or harness system. This device lets an employee be supported by a vertical surface, which allows them to work hands free. The vertical surface could be a pole or something similar. These positioning devices have a maximum fall of no more than 2 feet. Positioning devices are prohibited for use with scissor lifts and any other machine that works on a horizontal platform.

Another commonly used tie-off in construction work is a fall arrest system. Fall arrest systems are devices that use a body harness—not a body belt—to allow arrested fall. This is only applicable when the aerial lift can physically withstand the vertical and lateral loads an arrested fall causes.

If you are not following these guidelines, now is a good time to start. OSHA is enforcing these guidelines strictly, as they report weekly deaths due to falls that these safety guidelines can prevent. If you do not follow the safety guidelines, you will be penalized. In 2010, OSHA proposed a penalty to a company for letting their workers on the roofs without fall protection. This penalty fine amounted to $70,000 dollars. A fine like this is nothing compared to the guilt that stems from the death of an employee—especially a death that could have been prevented. Do not let this happen to your employees. Keep safety as your number one concern when operating aerial lifts.

Related Searches for Heavy Equipment Parts  in Hillsboro, OH.

Heavy Construction Equipment Parts Hillsboro Ohio

Heavy Construction Equipment Parts Hillsboro Ohio Construction companies in and around Massachusetts know that when looking for Scissor Lift Parts, EQSLLC.Com is the company to reach out to! But did you know that EQSLLC.Com is the #1 supplier of heavy equipment parts in Hillsboro, Ohio and neighboring areas. Regardless of what you [...]

2018-03-10T22:19:07+00:00