Heavy Construction Equipment Parts Englewood Ohio

equipment rental Shippensburg PA

Equipment Services LLC parts department, a top provider of construction equipment in Englewood, OH. EQSLLC.Com is well known as the company go to company for Scissor Lift Parts in Philadelphia but quickly become a favorite with contractors in Englewood, OH. If your construction machinery in need of repairs and you’re considering buying used machinery parts in lieu of a new one? While there are many advantages to purchasing used parts, you should be extra careful when purchasinig them. Below are three guidelines you can follow:

  1. Pick a respectable place to buy the parts.

You do not want to purchase faulty or mismatched parts. Be sure that you are buying from a reliable store so you could return the part to them if it won’t work. Also, most of these trusted shops offer a guarantee on their products.

  1. Find out the background of the old equipment part

Always remember that you’re buying used machinery part, so it could have gotten some wear and tear. Learn specifically where the part was taken from and for how long that machinery has been used. It also pays to know if it is an old, repaired, or refurbished part.

  1. Understand what you are purchasing.

Equipment parts come in several kinds. Some parts may even look alike but won’t perform in the same way. Before buying from a parts provider, make sure that you carry all the data about your heavy machinery at hand, like its VIN. You will never know if things like these will come handy.

New & Used Heavy Equipment Englewood Ohio

Nowadays is not difficult to locate new {genuine} heavy equipment on the internet. It is also not strange to get scammed by shady characters. When you deal with Equipment Services LLC you can be sure that you’re dealing with a reputable construction equipment parts dealer. If you’re in need heavy equipment parts, you normally have two choices. You can buy used or you can buy brand new. Each option has its own advantages and it’s up to you to decide which way to go. If you want to buy used equipment parts, below are more tips for you.

  1. Get used but authentic parts.

Most machinery parts are obtained from broken-down heavy construction equipment. Some are produced by another company. Check if you have a way of knowing which group the part you’re buying falls under. You’re better off with old but genuine parts.

  1. Get the part code.

When purchasing old heavy construction machinery parts, make sure that you have the part code with you. Doing so assures you that you’ll be given the actual part that you need. You might have to go through the trouble of finding out this detail, but it is all worth it in the end.

  1. Consult the right people.

It pays to buy parts from people who have long years of knowledge in the field. If you do, they can refer you to other dealers if they do not have the part you require.

Old construction machinery parts are great if your construction machinery requires repairs and a new part seems to be too expensive. With these tips, you’ll certainly purchase the right one. If by any chance you have heard of of EQSLLC.Com we ask that you check out at our blog.

Englewood Heavy Equipment And Or Construction Equipment Related Articles:

Best 6000 lb Telehandler To Rent

equipment rental Newtown PA

If you are in the market for renting a 6,000 pound telehandler, you have a lot of choices. While there are many, the main three telehandlers you will have to choose from are Genie, JLG, and SkyTrak. The best way to choose a telehandler for rent is to examine the specifications of each option and compare these to your job’s specifications.

Height is one of the most important specifications to consider when renting a telehandler. You will have to get a telehandler that reaches the height you need for your jobs. If you fail to do so and attempt reaching heights above the specified maximum height reach you will risk toppling over. Toppling over can result in injury and fatality. Another characteristic similar to this is reach. If you try to reach farther than the machine can safely reach, the machine might become unbalanced. This is another cause of toppling over.

If you are considering renting the SkyTrak telescopic forklift, know that this machine’s maximum lift height is 36 feet 1 inch. Its maximum horizontal reach is 22 feet 4 inches. The drawbar pull for this machine is 22,000 pounds. It has a frame leveling of 10 degrees. When it comes to lift capacity, the SkyTrak telehandler can handle 6,000 pounds at full height. At maximum reach however, it can only hold 1,800 pounds. When lifting, the maximum speed is 12 seconds. When lowering, the maximum speed is 9 seconds. When telescoping in and out, the maximum speed is 14 seconds. When traveling, the maximum speed is 19 miles per hour.

The 6,000 pound JLG telescopic forklift has an 18,000 pound drawbar pull. This machine has 4 forward gears and 3 reverse gears. When traveling, the JLG telehandler can go a speed of 19.5 miles per hour. The lift capacity for this machine at maximum height is 6,000 pounds. The JLG telehandler will lift up to 42 feet and reach forward to 29 feet. When extended fully, it can hold 1,000 pounds. When moving upwards it maintains a speed of 14 seconds. When moving down it moves at a speed of 10 seconds. When extending, the JLG telescopic forklift has a speed of 20 seconds. When retracting, the JLG has a speed of 8 seconds.

The Genie telehandler drawbar pull is a lot less than the JLG at 15,100 pounds. Instead of 4 forward gears, the Genie has only 3 forward gears and 3 reverse gears. When travelling forward, the Genie telescopic forklift moves at 18 miles per hour. It lifts up to 36 feet high and can hold 5,000 pounds at this height. It will reach 21 feet forward and can carry 1,500 pounds while extended for the full 21 feet. The Genie telehandler lifts up in 10 seconds and booms down in 8 seconds. It extends in 11 seconds and retracts in 9 seconds. All of the telehandlers mentioned run on diesel fuel.

When looking to rent one of these telehandlers, it is vital that you compare their specs to those of the jobs you intend to carry out using these machines. If you rent a machine with specs that do not match your job, you will not be able to safely and efficiently carry out that job. If you need further assistance choosing a 6,000 telehandler, contact our EQS experts for more information.

Related Searches for Heavy Construction Equipment Parts  in Englewood, OH.

Heavy Construction Equipment Parts Englewood Ohio

Heavy Construction Equipment Parts Englewood Ohio Companies in New Jersey know that when looking for JLG Boom Lift Parts, Equipment Services LLC is the one to call. But did you know that EQSLLC.Com is the #1 supplier of heavy equipment parts in Englewood, OH and neighboring areas. Regardless of what you may [...]

2018-03-04T18:10:00+00:00