Heavy Construction Equipment Parts Canton Ohio

Heavy Equipment Repairs Essex County NJ

Equipment Services LLC parts department, a top rated provider of heavy equipment and or construction equipment in Canton, OH. Equipment Services LLC is well known as the one go to company for Bil Jax Parts in New York but quickly become a favorite with people in Canton, OH. If your construction equipment in dire need of repair and you’re looking at buying used equipment parts in lieu of a new one? While there are a lot of advantages to buying old parts, you should be extra careful when buying them. Below are a few tips you can follow:

  1. Choose a respectable dealer to get the parts.

You don’t want to get faulty or incompatible parts. Be certain that you’re buying from a reliable shop so you can bring back the part to them in case it will not work. Also, most of these respectable dealers offer a guarantee on their items.

  1. Find out the background of the old machinery part

Always keep in mind that you are buying old machinery part, so it may have gotten some wear and tear. Know exactly where the part was taken from and the length of time that machinery has been used. It also pays to know if it is a used, repaired, or refurbished part.

  1. Understand what you’re getting.

Equipment parts come in several types. A few parts may actually look the same but won’t perform similarly. When talking to a parts provider, be sure that you carry all the data about your construction equipment on hand, like its vehicle identification number. You will never know if things such as these will come handy.

New & Used Heavy Construction Equipment Canton Ohio

Nowadays is not hard to find new or used {genuine} heavy construction equipment on the internet. It is also not strange to get ripped off by shady characters. When you deal with EQSLLC.Com you are sure that you’re dealing with a reputable heavy equipment and or construction equipment parts dealer. When you are in need equipment parts, you technically have two choices. You may purchase old or you can buy new. Each option has its own advantages and it is up to you to weigh them out. If you decide to purchase old equipment parts, below are more tips for you.

  1. But used but authentic parts.

Several machinery parts are removed from junked heavy construction equipment. Some are produced by another company. See if you have a way of knowing which category the part you’re purchasing falls under. You’re better off with used but authentic parts.

  1. Use the part code.

When buying used heavy construction equipment parts, make certain that you have the part code with you. That assures you that you will get hold of the actual part that you require. You may have to go through the trouble of knowing this information, but it’ll be all worth it in the end.

  1. Ask the right people.

It pays to purchase parts from dealers who have many years of knowledge in the field. This way, they can point you to other dealers if they don’t sell the part you require.

Old construction equipment parts are best if your construction equipment in dire need of repair and a new part seems to be very expensive. With these tips, you’ll certainly end up with the perfect one. If you don’t know about EQSLLC.Com we ask that you visit at our blog.

Canton Heavy Construction Equipment Related Blog Post:

Best 6000 lb Telehandler To Rent

equipment rental Imperial PA

If you are in the market for renting a 6,000 pound telehandler, you have a lot of choices. While there are many, the main three telehandlers you will have to choose from are Genie, JLG, and SkyTrak. The best way to choose a telehandler for rent is to examine the specifications of each option and compare these to your job’s specifications.

Height is one of the most important specifications to consider when renting a telehandler. You will have to get a telehandler that reaches the height you need for your jobs. If you fail to do so and attempt reaching heights above the specified maximum height reach you will risk toppling over. Toppling over can result in injury and fatality. Another characteristic similar to this is reach. If you try to reach farther than the machine can safely reach, the machine might become unbalanced. This is another cause of toppling over.

If you are considering renting the SkyTrak telescopic forklift, know that this machine’s maximum lift height is 36 feet 1 inch. Its maximum horizontal reach is 22 feet 4 inches. The drawbar pull for this machine is 22,000 pounds. It has a frame leveling of 10 degrees. When it comes to lift capacity, the SkyTrak telehandler can handle 6,000 pounds at full height. At maximum reach however, it can only hold 1,800 pounds. When lifting, the maximum speed is 12 seconds. When lowering, the maximum speed is 9 seconds. When telescoping in and out, the maximum speed is 14 seconds. When traveling, the maximum speed is 19 miles per hour.

The 6,000 pound JLG telescopic forklift has an 18,000 pound drawbar pull. This machine has 4 forward gears and 3 reverse gears. When traveling, the JLG telehandler can go a speed of 19.5 miles per hour. The lift capacity for this machine at maximum height is 6,000 pounds. The JLG telehandler will lift up to 42 feet and reach forward to 29 feet. When extended fully, it can hold 1,000 pounds. When moving upwards it maintains a speed of 14 seconds. When moving down it moves at a speed of 10 seconds. When extending, the JLG telescopic forklift has a speed of 20 seconds. When retracting, the JLG has a speed of 8 seconds.

The Genie telehandler drawbar pull is a lot less than the JLG at 15,100 pounds. Instead of 4 forward gears, the Genie has only 3 forward gears and 3 reverse gears. When travelling forward, the Genie telescopic forklift moves at 18 miles per hour. It lifts up to 36 feet high and can hold 5,000 pounds at this height. It will reach 21 feet forward and can carry 1,500 pounds while extended for the full 21 feet. The Genie telehandler lifts up in 10 seconds and booms down in 8 seconds. It extends in 11 seconds and retracts in 9 seconds. All of the telehandlers mentioned run on diesel fuel.

When looking to rent one of these telehandlers, it is vital that you compare their specs to those of the jobs you intend to carry out using these machines. If you rent a machine with specs that do not match your job, you will not be able to safely and efficiently carry out that job. If you need further assistance choosing a 6,000 telehandler, contact our EQS experts for more information.

Related Searches for Heavy Construction Equipment Parts  in Canton, Ohio.

Heavy Construction Equipment Parts Canton Ohio

Heavy Construction Equipment Parts Canton Ohio People in and around New Jersey know that if looking for Scissor Lifts Parts, EQSLLC.Com is the company to contact. But did you know that Equipment Services LLC is the #1 supplier of heavy equipment parts in Canton, Ohio and neighboring areas. In disagreement with what [...]

2018-03-12T05:17:24+00:00