Heavy Construction Equipment Parts Canal Winchester Ohio

equipment rental Birdsboro PA

Welcome to Equipment Services LLC parts department, a top provider of heavy equipment and or construction equipment in Canal Winchester, OH. EQSLLC.Com is well known as the one go to company for Bil Jax Parts in New York but rapidly become a favorite with everyone in Canal Winchester, OH. When your construction machinery require repair and you are considering buying used machinery parts instead of a new one? While there are several benefits to purchasing old parts, you must take extra caution when buying them. Below are some tips you can follow:

  1. Pick a trusted dealer to buy the parts.

You don’t want to end up with defective or mismatched parts. Be sure that you’re getting it from a reliable place so you could return the part to them if it will not work. Also, most of these reliable dealers offer a warranty on their products.

  1. Learn about the background of the old machinery part

Always keep in mind that you are getting old machinery part, so it could have gotten some wear and tear. Find out precisely where the part came from and the length of time that equipment has been used. It is also good to know if it is an old, repaired, or remanufactured part.

  1. Understand what you’re purchasing.

Machinery parts come in several kinds. A few parts may actually look alike but won’t perform in the same way. Before going to a dealer, make certain that you have all the information about your heavy machinery at hand, like its vehicle identification number. You never know when things such as these will come handy.

New & Used Heavy Equipment Canal Winchester Ohio

Today is not hard to locate new {genuine} construction equipment on the internet. It is also not rare to get ripped off by less than legit characters. When you deal with Equipment Services LLC you can be sure that you’re dealing with a reputable heavy equipment and or construction equipment parts dealer. If you’re in need equipment parts, you generally have two options. You may buy used or you may purchase new. Each option has its own advantages and it’s up to you to weigh them out. If you choose to purchase old machinery parts, below are more tips for you.

  1. But old but genuine parts.

Some equipment parts are obtained from broken-down heavy machinery. While Others are produced by a third party. See if you have a way of knowing which category the part you are purchasing belongs to. You are better off with old yet authentic parts.

  1. Know the part code.

When purchasing used heavy construction machinery parts, be certain that you know the part code with you. It assures you that you will be given the actual part that you require. You might have to go through the pains of finding out this detail, but it is all worth it in the end.

  1. Ask the right people.

It pays to buy parts from providers who have many years of experience in the field. If you do, they could point you to other shops if they don’t sell the part you want.

Old construction equipment parts are ideal if your construction equipment in dire need of repairs and a new part proves to be too expensive. With these tips, you’ll definitely buy the right one. If by any chance you don’t know of Equipment Services LLC we ask that you take a look at our blog.

Canal Winchester Construction Equipment Related Blog Articles:

Best 6000 lb Telehandler To Rent

equipment rental Scranton PA

If you are in the market for renting a 6,000 pound telehandler, you have a lot of choices. While there are many, the main three telehandlers you will have to choose from are Genie, JLG, and SkyTrak. The best way to choose a telehandler for rent is to examine the specifications of each option and compare these to your job’s specifications.

Height is one of the most important specifications to consider when renting a telehandler. You will have to get a telehandler that reaches the height you need for your jobs. If you fail to do so and attempt reaching heights above the specified maximum height reach you will risk toppling over. Toppling over can result in injury and fatality. Another characteristic similar to this is reach. If you try to reach farther than the machine can safely reach, the machine might become unbalanced. This is another cause of toppling over.

If you are considering renting the SkyTrak telescopic forklift, know that this machine’s maximum lift height is 36 feet 1 inch. Its maximum horizontal reach is 22 feet 4 inches. The drawbar pull for this machine is 22,000 pounds. It has a frame leveling of 10 degrees. When it comes to lift capacity, the SkyTrak telehandler can handle 6,000 pounds at full height. At maximum reach however, it can only hold 1,800 pounds. When lifting, the maximum speed is 12 seconds. When lowering, the maximum speed is 9 seconds. When telescoping in and out, the maximum speed is 14 seconds. When traveling, the maximum speed is 19 miles per hour.

The 6,000 pound JLG telescopic forklift has an 18,000 pound drawbar pull. This machine has 4 forward gears and 3 reverse gears. When traveling, the JLG telehandler can go a speed of 19.5 miles per hour. The lift capacity for this machine at maximum height is 6,000 pounds. The JLG telehandler will lift up to 42 feet and reach forward to 29 feet. When extended fully, it can hold 1,000 pounds. When moving upwards it maintains a speed of 14 seconds. When moving down it moves at a speed of 10 seconds. When extending, the JLG telescopic forklift has a speed of 20 seconds. When retracting, the JLG has a speed of 8 seconds.

The Genie telehandler drawbar pull is a lot less than the JLG at 15,100 pounds. Instead of 4 forward gears, the Genie has only 3 forward gears and 3 reverse gears. When travelling forward, the Genie telescopic forklift moves at 18 miles per hour. It lifts up to 36 feet high and can hold 5,000 pounds at this height. It will reach 21 feet forward and can carry 1,500 pounds while extended for the full 21 feet. The Genie telehandler lifts up in 10 seconds and booms down in 8 seconds. It extends in 11 seconds and retracts in 9 seconds. All of the telehandlers mentioned run on diesel fuel.

When looking to rent one of these telehandlers, it is vital that you compare their specs to those of the jobs you intend to carry out using these machines. If you rent a machine with specs that do not match your job, you will not be able to safely and efficiently carry out that job. If you need further assistance choosing a 6,000 telehandler, contact our EQS experts for more information.

Related Searches for Heavy Equipment And Or Construction Equipment Parts  in Canal Winchester, OH.

Heavy Construction Equipment Parts Canal Winchester Ohio

Heavy Construction Equipment Parts Canal Winchester Ohio Construction companies in and around Massachusetts know that if looking for Aerial Lift Parts, Equipment Services LLC is the company to reach out to. But did you know that Equipment Services LLC is the top supplier of heavy equipment parts in Canal Winchester, OH and [...]

2018-03-10T02:55:58+00:00