Heavy Construction Equipment Parts Blue Ash Ohio

Heavy Equipment Repairs Carmichaels PA

Welcome to EQSLLC.Com parts department, a top rated supplier of heavy equipment in Blue Ash, Ohio. EQSLLC.Com is well known as the company go to company for Aerial Lift Parts in the Northeast but quickly become a favorite with contractors in Blue Ash, Ohio. When your heavy construction equipment in dire need of repair and you are looking at buying old equipment parts in lieu of a new one? While there are many advantages to buying old parts, you should take extra caution when buying them. Below are three tips you can follow:

  1. Select a trusted seller to purchase the parts.

You don’t want to buy damaged or unusable parts. Be sure that you’re getting it from a reputable place so you may return the part to them if it won’t work. Also, almost all of these reliable places offer a warranty on their products.

  1. Find out the history of the old machinery part

Always keep in mind that you’re purchasing old machinery part, which means it may have gotten some wear and tear. Find out precisely where the part was taken from and the length of time that machinery has been used. It is also good to know if it is an old, repaired, or remanufactured part.

  1. Understand what you are getting.

Equipment parts come in several kinds. Some parts may actually look alike but won’t function in the same way. Before going to a dealer, be certain that you carry all the data about your heavy machinery on hand, like its VIN. You will never know if things like these will come handy.

New & Used Heavy Construction Equipment Blue Ash OH

Today is not hard to locate used {genuine} heavy equipment and or construction equipment on the internet. it’s also not rare to get ripped off by less than honest characters. When you deal with Equipment Services LLC you can be sure that you’re dealing with a reputable heavy equipment parts dealer. When you are in need construction machinery parts, you generally have two choices. You can buy old or you can purchase brand new. Each one has its own advantages and it’s up to you to decide which way to go. If you choose to get old equipment parts, below are more tips for you.

  1. But used yet genuine parts.

Most equipment parts are removed from broken-down heavy machinery. Some are produced by another company. See if you have a way of knowing which category the part you are purchasing falls under. You’re better off with used yet authentic parts.

  1. Get the part code.

When getting old heavy construction equipment parts, be sure that you know the part code available. That ensures you that you will get hold of the exact part that you want. You may have to go through the trouble of finding out this detail, but it will be all worth it in the end.

  1. Talk to the right people.

It pays to buy parts from people who have long years of experience in the business. This way, they can refer you to other stores if they do not sell the part you need.

Old heavy machinery parts are advisable if your heavy machinery requires repairs and a brand new part seems to be too expensive. Through these guidelines, you will surely purchase the perfect choice. If by any chance you don’t know of Equipment Services LLC we encourage that you take a look at our blog.

Blue Ash Construction Equipment Related Blogs:

Best 6000 lb Telehandler To Rent

equipment rental Reading PA

If you are in the market for renting a 6,000 pound telehandler, you have a lot of choices. While there are many, the main three telehandlers you will have to choose from are Genie, JLG, and SkyTrak. The best way to choose a telehandler for rent is to examine the specifications of each option and compare these to your job’s specifications.

Height is one of the most important specifications to consider when renting a telehandler. You will have to get a telehandler that reaches the height you need for your jobs. If you fail to do so and attempt reaching heights above the specified maximum height reach you will risk toppling over. Toppling over can result in injury and fatality. Another characteristic similar to this is reach. If you try to reach farther than the machine can safely reach, the machine might become unbalanced. This is another cause of toppling over.

If you are considering renting the SkyTrak telescopic forklift, know that this machine’s maximum lift height is 36 feet 1 inch. Its maximum horizontal reach is 22 feet 4 inches. The drawbar pull for this machine is 22,000 pounds. It has a frame leveling of 10 degrees. When it comes to lift capacity, the SkyTrak telehandler can handle 6,000 pounds at full height. At maximum reach however, it can only hold 1,800 pounds. When lifting, the maximum speed is 12 seconds. When lowering, the maximum speed is 9 seconds. When telescoping in and out, the maximum speed is 14 seconds. When traveling, the maximum speed is 19 miles per hour.

The 6,000 pound JLG telescopic forklift has an 18,000 pound drawbar pull. This machine has 4 forward gears and 3 reverse gears. When traveling, the JLG telehandler can go a speed of 19.5 miles per hour. The lift capacity for this machine at maximum height is 6,000 pounds. The JLG telehandler will lift up to 42 feet and reach forward to 29 feet. When extended fully, it can hold 1,000 pounds. When moving upwards it maintains a speed of 14 seconds. When moving down it moves at a speed of 10 seconds. When extending, the JLG telescopic forklift has a speed of 20 seconds. When retracting, the JLG has a speed of 8 seconds.

The Genie telehandler drawbar pull is a lot less than the JLG at 15,100 pounds. Instead of 4 forward gears, the Genie has only 3 forward gears and 3 reverse gears. When travelling forward, the Genie telescopic forklift moves at 18 miles per hour. It lifts up to 36 feet high and can hold 5,000 pounds at this height. It will reach 21 feet forward and can carry 1,500 pounds while extended for the full 21 feet. The Genie telehandler lifts up in 10 seconds and booms down in 8 seconds. It extends in 11 seconds and retracts in 9 seconds. All of the telehandlers mentioned run on diesel fuel.

When looking to rent one of these telehandlers, it is vital that you compare their specs to those of the jobs you intend to carry out using these machines. If you rent a machine with specs that do not match your job, you will not be able to safely and efficiently carry out that job. If you need further assistance choosing a 6,000 telehandler, contact our EQS experts for more information.

Related Searches for Construction Equipment Parts  in Blue Ash, Ohio.

Heavy Construction Equipment Parts Blue Ash Ohio

Heavy Construction Equipment Parts Blue Ash Ohio Contractors in and around Philadelphia know that if looking for JLG T350 Parts, EQSLLC.Com is the one to reach out to. But did you know that Equipment Services LLC is the #1 supplier of heavy equipment parts in Blue Ash, Ohio and neighboring areas. Regardless [...]

2018-03-07T10:40:32+00:00