Heavy Construction Equipment Parts Bedford Ohio
Welcome to Equipment Services LLC parts department, a top provider of construction equipment in Bedford, OH. EQSLLC.Com is well known as the one go to company for Bil Jax Parts in New York but rapidly become a favorite with people in and around Bedford, Ohio. When your construction equipment require repair and you are looking at buying used equipment parts in lieu of a new one? While there are a lot of benefits to purchasing old parts, you should take extra caution when purchasinig them. Below are some tips you can follow:
- Choose a trusted shop to buy the parts.
You do not want to get faulty or unusable parts. Make certain that you’re getting it from a reliable place so you could return the part to them if it does not work. Also, almost all of these trusted stores offer a warranty on their items.
- Know the background of the old equipment part
Always remember that you’re buying old machinery part, so it may have gone through some wear and tear. Find out exactly where the part was taken from and for how long that machinery has been working. It also pays to know if it is an old, repaired, or remanufactured part.
- Understand what you’re getting.
Machinery parts come in different types. A few parts may actually look alike but won’t work in the same way. When going to a seller, be sure that you have all the data about your heavy machinery available, like its vehicle identification number. You will never know if things such as these can come handy.
New & Used Heavy Construction Equipment Bedford Ohio
Nowadays is not difficult to locate used {genuine} heavy equipment and or construction equipment on the internet. it’s also not rare to get ripped off by less than honest characters. When you deal with Equipment Services LLC you can be sure that you’re dealing with a reputable heavy equipment parts dealer. If you are in need equipment parts, you normally have two options. You can buy used or you may buy brand new. Each option has its own advantages and it’s up to you to decide which way to go. If you decide to purchase used equipment parts, below are more tips for you.
- Purchase old yet authentic parts.
Several equipment parts are acquired from junked heavy construction equipment. While Others are produced by another company. Check if you have a way of knowing which category the part you are purchasing falls under. You are better off with old but authentic parts.
- Use the part code.
When getting old heavy construction equipment parts, make certain that you give the part code available. Doing so ensures you that you’ll be given the actual part that you need. You might have to go through the trouble of finding out this information, but it is all worth it in the end.
- Talk to the right people.
It pays to purchase parts from people who have many years of experience in the business. If you do, they could lead you to other shops if they do not have the part you want.
Used construction equipment parts are advisable if your heavy equipment in dire need of repair and a brand new part seems to be too expensive. With these guidelines, you’ll definitely end up with the right one. If by any chance you don’t know of EQSLLC.Com we ask that you take a look at our blog.
Bedford Heavy Construction Equipment Related Blogs:
Best 6000 lb Telehandler To Rent
If you are in the market for renting a 6,000 pound telehandler, you have a lot of choices. While there are many, the main three telehandlers you will have to choose from are Genie, JLG, and SkyTrak. The best way to choose a telehandler for rent is to examine the specifications of each option and compare these to your job’s specifications.
Height is one of the most important specifications to consider when renting a telehandler. You will have to get a telehandler that reaches the height you need for your jobs. If you fail to do so and attempt reaching heights above the specified maximum height reach you will risk toppling over. Toppling over can result in injury and fatality. Another characteristic similar to this is reach. If you try to reach farther than the machine can safely reach, the machine might become unbalanced. This is another cause of toppling over.
If you are considering renting the SkyTrak telescopic forklift, know that this machine’s maximum lift height is 36 feet 1 inch. Its maximum horizontal reach is 22 feet 4 inches. The drawbar pull for this machine is 22,000 pounds. It has a frame leveling of 10 degrees. When it comes to lift capacity, the SkyTrak telehandler can handle 6,000 pounds at full height. At maximum reach however, it can only hold 1,800 pounds. When lifting, the maximum speed is 12 seconds. When lowering, the maximum speed is 9 seconds. When telescoping in and out, the maximum speed is 14 seconds. When traveling, the maximum speed is 19 miles per hour.
The 6,000 pound JLG telescopic forklift has an 18,000 pound drawbar pull. This machine has 4 forward gears and 3 reverse gears. When traveling, the JLG telehandler can go a speed of 19.5 miles per hour. The lift capacity for this machine at maximum height is 6,000 pounds. The JLG telehandler will lift up to 42 feet and reach forward to 29 feet. When extended fully, it can hold 1,000 pounds. When moving upwards it maintains a speed of 14 seconds. When moving down it moves at a speed of 10 seconds. When extending, the JLG telescopic forklift has a speed of 20 seconds. When retracting, the JLG has a speed of 8 seconds.
The Genie telehandler drawbar pull is a lot less than the JLG at 15,100 pounds. Instead of 4 forward gears, the Genie has only 3 forward gears and 3 reverse gears. When travelling forward, the Genie telescopic forklift moves at 18 miles per hour. It lifts up to 36 feet high and can hold 5,000 pounds at this height. It will reach 21 feet forward and can carry 1,500 pounds while extended for the full 21 feet. The Genie telehandler lifts up in 10 seconds and booms down in 8 seconds. It extends in 11 seconds and retracts in 9 seconds. All of the telehandlers mentioned run on diesel fuel.
When looking to rent one of these telehandlers, it is vital that you compare their specs to those of the jobs you intend to carry out using these machines. If you rent a machine with specs that do not match your job, you will not be able to safely and efficiently carry out that job. If you need further assistance choosing a 6,000 telehandler, contact our EQS experts for more information.
Related Searches for Heavy Equipment Parts in Bedford, OH.
Thanks for visiting EQSLLC.Com if you need help with Bil Jax Parts contact us: