Heavy Construction Equipment Parts Amherst Ohio

equipment rental Abington PA

EQSLLC.Com parts department, a top supplier of heavy equipment and or construction equipment in Amherst, Ohio. EQSLLC.Com is well known as the company go to company for JLG Lifts Parts in New Jersey but rapidly become a favorite with developers in and around Amherst, OH. If your heavy construction equipment in need of repairs and you’re looking at purchasing used equipment parts instead of a new one? While there are many advantages to purchasing old parts, you must take extra caution when buying them. Below are some guidelines you can follow:

  1. Choose a trusted seller to buy the parts.

You do not want to buy faulty or unusable parts. Make certain that you are getting it from a respectable place so you can return the part to them in case it doesn’t work. Also, almost all of these reputable stores offer a warranty on their items.

  1. Find out the history of the old equipment part

Always remember that you’re buying used equipment part, so it may have gotten some wear and tear. Know precisely where the part came from and the length of time that machinery has been used. It also pays to know if it is a used, repaired, or remanufactured part.

  1. Understand what you are buying.

Equipment parts come in several types. Some parts may actually look alike but won’t work alike. Before going to a seller, make certain that you carry all the data about your heavy equipment at hand, like its VIN. You will never know when things such as these will come handy.

New & Used Construction Equipment Amherst Ohio

Today is not difficult to find new or used {genuine} heavy construction equipment online. It is also not strange to get ripped off by shady characters. When you deal with Equipment Services LLC you are sure that you’re dealing with a reputable heavy construction equipment parts dealer. When you are in need equipment parts, you technically have two choices. You may purchase used or you can purchase brand new. Each option has its own advantages and it is up to you to decide which way to go. If you decide to purchase old equipment parts, below are more tips for you.

  1. But used but genuine parts.

Several equipment parts are obtained from broken-down heavy machinery. Some are produced by another company. See if you have some way of knowing which group the part you are getting falls under. You’re better off with old but authentic parts.

  1. Get the part code.

When getting old heavy construction machinery parts, be certain that you give the part code available. Doing so ensures you that you’ll get the exact part that you need. You might have to go through the pains of finding out this information, but it is all worth it in the end.

  1. Consult the experts.

It pays to buy parts from people who have many years of knowledge in the field. This way, they could lead you to other places if they do not have the part you need.

Used heavy equipment parts are best if your heavy equipment is in need of repair and a new part proves to be very costly. Through these tips, you’ll definitely get the perfect one. If by any chance you have heard of about EQSLLC.Com we encourage that you take a look at our blog.

Amherst Construction Equipment Related Post:

Best 6000 lb Telehandler To Rent

Heavy Equipment Repairs Hudson County NJ

If you are in the market for renting a 6,000 pound telehandler, you have a lot of choices. While there are many, the main three telehandlers you will have to choose from are Genie, JLG, and SkyTrak. The best way to choose a telehandler for rent is to examine the specifications of each option and compare these to your job’s specifications.

Height is one of the most important specifications to consider when renting a telehandler. You will have to get a telehandler that reaches the height you need for your jobs. If you fail to do so and attempt reaching heights above the specified maximum height reach you will risk toppling over. Toppling over can result in injury and fatality. Another characteristic similar to this is reach. If you try to reach farther than the machine can safely reach, the machine might become unbalanced. This is another cause of toppling over.

If you are considering renting the SkyTrak telescopic forklift, know that this machine’s maximum lift height is 36 feet 1 inch. Its maximum horizontal reach is 22 feet 4 inches. The drawbar pull for this machine is 22,000 pounds. It has a frame leveling of 10 degrees. When it comes to lift capacity, the SkyTrak telehandler can handle 6,000 pounds at full height. At maximum reach however, it can only hold 1,800 pounds. When lifting, the maximum speed is 12 seconds. When lowering, the maximum speed is 9 seconds. When telescoping in and out, the maximum speed is 14 seconds. When traveling, the maximum speed is 19 miles per hour.

The 6,000 pound JLG telescopic forklift has an 18,000 pound drawbar pull. This machine has 4 forward gears and 3 reverse gears. When traveling, the JLG telehandler can go a speed of 19.5 miles per hour. The lift capacity for this machine at maximum height is 6,000 pounds. The JLG telehandler will lift up to 42 feet and reach forward to 29 feet. When extended fully, it can hold 1,000 pounds. When moving upwards it maintains a speed of 14 seconds. When moving down it moves at a speed of 10 seconds. When extending, the JLG telescopic forklift has a speed of 20 seconds. When retracting, the JLG has a speed of 8 seconds.

The Genie telehandler drawbar pull is a lot less than the JLG at 15,100 pounds. Instead of 4 forward gears, the Genie has only 3 forward gears and 3 reverse gears. When travelling forward, the Genie telescopic forklift moves at 18 miles per hour. It lifts up to 36 feet high and can hold 5,000 pounds at this height. It will reach 21 feet forward and can carry 1,500 pounds while extended for the full 21 feet. The Genie telehandler lifts up in 10 seconds and booms down in 8 seconds. It extends in 11 seconds and retracts in 9 seconds. All of the telehandlers mentioned run on diesel fuel.

When looking to rent one of these telehandlers, it is vital that you compare their specs to those of the jobs you intend to carry out using these machines. If you rent a machine with specs that do not match your job, you will not be able to safely and efficiently carry out that job. If you need further assistance choosing a 6,000 telehandler, contact our EQS experts for more information.

Related Searches for Heavy Equipment And Or Construction Equipment Parts  in Amherst, Ohio.

Heavy Construction Equipment Parts Amherst Ohio

Heavy Construction Equipment Parts Amherst Ohio Developers in Philadelphia know that if looking for Aerial Lift Parts, EQSLLC.Com is the company to contact. But did you know that Equipment Services LLC is the top supplier of heavy equipment parts in Amherst, Ohio and neighboring areas. Despite what you may think there are [...]

2018-03-11T02:12:07+00:00